Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMC Made) › from 2021.07
RM3700E _54 Brake _093745 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0484411 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model TMC Made) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model TMC Made)  C13C015  Brake Pressure Control Solenoid "A" Control Circuit Short to Battery or Open  C13C018  Brake Pressure Control Solenoid "A" Control Circuit Current Below Threshold  C13C019  Brake Pressure Control Solenoid "A" Control Circuit Current Above Threshold  C13C01C  Brake Pressure Control Solenoid "A" Control Circuit Voltage Out of Range  C13C028  Brake Pressure Control Solenoid "A" Control Signal Bias Level Out of Range / Zero Adjustment Failure  C13C915  Brake Pressure Control Solenoid "B" Control Circuit Short to Battery or Open  C13C918  Brake Pressure Control Solenoid "B" Control Circuit Current Below Threshold  C13C919  Brake Pressure Control Solenoid "B" Control Circuit Current Above Threshold  C13C91C  Brake Pressure Control Solenoid "B" Control Circuit Voltage Out of Range  C13C928  Brake Pressure Control Solenoid "B" Control Signal Bias Level Out of Range / Zero Adjustment Failure  C14F115  Brake Pressure Control Solenoid "C" Control Circuit Short to Battery or Open  C14F118  Brake Pressure Control Solenoid "C" Control Circuit Current Below Threshold  C14F119  Brake Pressure Control Solenoid "C" Control Circuit Current Above Threshold  C14F11C  Brake Pressure Control Solenoid "C" Control Circuit Voltage Out of Range  C14F128  Brake Pressure Control Solenoid "C" Control Signal Bias Level Out of Range / Zero Adjustment Failure  C14FA15  Brake Pressure Control Solenoid "D" Control Circuit Short to Battery or Open  C14FA18  Brake Pressure Control Solenoid "D" Control Circuit Current Below Threshold  C14FA19  Brake Pressure Control Solenoid "D" Control Circuit Current Above Threshold  C14FA1C  Brake Pressure Control Solenoid "D" Control Circuit Voltage Out of Range  C14FA28  Brake Pressure Control Solenoid "D" Control Signal Bias Level Out of Range / Zero Adjustment Failure  


DESCRIPTION

The linear solenoids SLA and SLR control the regulator based on signals from the skid control ECU (brake booster with master cylinder assembly) and produce servo pressure in accordance with the vehicle condition.

When the system is normal, the switching solenoid SGH is opened to allow brake fluid to flow to the stroke simulator when the brake pedal is depressed. When the system is abnormal, the switching solenoid SGH closes to prevent the flow of brake fluid.

When the system is normal, the switching solenoid SSA is closed. When the system is abnormal, the switching solenoid SSA is opened to allow fluid to flow to the brake master cylinder reservoir assembly.

HINT:

If the supply voltage decreases, a drop in current may cause DTCs to be stored.


DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
C13C015 Brake Pressure Control Solenoid "A" Control Circuit Short to Battery or Open An open is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C13C018 Brake Pressure Control Solenoid "A" Control Circuit Current Below Threshold Insufficient current is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C13C019 Brake Pressure Control Solenoid "A" Control Circuit Current Above Threshold Any of the following is detected:
·

Overcurrent is detected in the solenoid for 0.05 seconds or more.

·

An excessive current is detected in the solenoid for 0.05 seconds or more.


·

Supply voltage reduced

·

Brake booster with master cylinder assembly


Brake/EPB A
C13C01C Brake Pressure Control Solenoid "A" Control Circuit Voltage Out of Range A malfunction in the solenoid current monitoring circuit is detected for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C13C028 Brake Pressure Control Solenoid "A" Control Signal Bias Level Out of Range / Zero Adjustment Failure Current leakage is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C13C915 Brake Pressure Control Solenoid "B" Control Circuit Short to Battery or Open An open is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C13C918 Brake Pressure Control Solenoid "B" Control Circuit Current Below Threshold Insufficient current is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C13C919 Brake Pressure Control Solenoid "B" Control Circuit Current Above Threshold
·

Overcurrent is detected in the solenoid for 0.05 seconds or more.

·

An excessive current is detected in the solenoid for 0.05 seconds or more.


Brake booster with master cylinder assembly Brake/EPB A
C13C91C Brake Pressure Control Solenoid "B" Control Circuit Voltage Out of Range A malfunction in the solenoid current monitoring circuit is detected for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C13C928 Brake Pressure Control Solenoid "B" Control Signal Bias Level Out of Range / Zero Adjustment Failure Current leakage is detected in the solenoid for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C14F115 Brake Pressure Control Solenoid "C" Control Circuit Short to Battery or Open An open is detected in SSA for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C14F118 Brake Pressure Control Solenoid "C" Control Circuit Current Below Threshold Monitoring value of SSA continues to be excessively lower than request value. Brake booster with master cylinder assembly Brake/EPB A
C14F119 Brake Pressure Control Solenoid "C" Control Circuit Current Above Threshold
·

Overcurrent is detected in SSA for 0.05 seconds or more.

·

Monitoring value of SSA continues to be excessively higher than request value.


·

Supply voltage reduced

·

Brake booster with master cylinder assembly


Brake/EPB A
C14F11C Brake Pressure Control Solenoid "C" Control Circuit Voltage Out of Range A malfunction in the SSA current monitoring circuit is detected for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C14F128 Brake Pressure Control Solenoid "C" Control Signal Bias Level Out of Range / Zero Adjustment Failure Current leakage is detected in SSA for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C14FA15 Brake Pressure Control Solenoid "D" Control Circuit Short to Battery or Open An open is detected in SGH for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C14FA18 Brake Pressure Control Solenoid "D" Control Circuit Current Below Threshold Monitoring value of SGH continues to be excessively lower than request value. Brake booster with master cylinder assembly Brake/EPB A
C14FA19 Brake Pressure Control Solenoid "D" Control Circuit Current Above Threshold
·

Overcurrent is detected in SGH for 0.05 seconds or more.

·

Monitoring value of SGH continues to be excessively higher than request value.


·

Supply voltage reduced

·

Brake booster with master cylinder assembly


Brake/EPB A
C14FA1C Brake Pressure Control Solenoid "D" Control Circuit Voltage Out of Range A malfunction in the SGH current monitoring circuit is detected for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A
C14FA28 Brake Pressure Control Solenoid "D" Control Signal Bias Level Out of Range / Zero Adjustment Failure Current leakage is detected in SGH for 0.05 seconds or more. Brake booster with master cylinder assembly Brake/EPB A

CAUTION / NOTICE / HINT

NOTICE:

After replacing the brake booster with master cylinder assembly, perform linear solenoid valve offset learning, ABS holding solenoid valve learning, yaw rate and acceleration sensor zero point calibration and system information memorization after performing "Reset Memory".

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMC Made)>UTILITY


PROCEDURE

1.REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

NEXT

END