These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the yaw rate and acceleration sensor (airbag sensor assembly).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| C006328 | Yaw Rate Sensor Signal Bias Level Out of Range / Zero Adjustment Failure | With the vehicle stationary, the yaw rate sensor output value is not 0°/s. | Yaw rate sensor (airbag sensor assembly) | Brake/EPB | A |
| C006396 | Yaw Rate Sensor Component Internal Failure | With the +BS terminal voltage between 9.5 and 17.4 V, a data malfunction signal is received from a yaw rate sensor. | Yaw rate sensor (airbag sensor assembly) | Brake/EPB | A |
If the yaw rate and acceleration sensor (airbag sensor assembly) was replaced or reinstalled, perform "Calibration".
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>CENTER AIRBAG SENSOR ASSEMBLY>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT