Refer to DTC C05001F.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| C05003A | Left Front Wheel Speed Sensor Signal Has Too Many Pulses | When not in Dealer Mode (Signal Check) or Inspection Mode, the output of the speed sensor detected by the skid control ECU (brake actuator assembly) is too high for 5 second or more. | Skid control ECU (brake actuator assembly) | Brake/EPB | A |
| C05063A | Right Front Wheel Speed Sensor Signal Has Too Many Pulses | When not in Dealer Mode (Signal Check) or Inspection Mode, the output of the speed sensor detected by the skid control ECU (brake actuator assembly) is too high for 5 second or more. | Skid control ECU (brake actuator assembly) | Brake/EPB | A |
After replacing the skid control ECU (brake actuator assembly), perform "Calibration".
| Proceed to |
|---|
| NEXT |
NEXT