Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM (w/o Advanced Park) › from 2021.07
RM3700E _56 Audio / Visual / Telematics _093031 PARK ASSIST / MONITORING _0485737 PANORAMIC VIEW MONITOR SYSTEM(w/o Advanced Park) C

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM(w/o Advanced Park)  C1614  ECU Malfunction  


DESCRIPTION

This DTC is stored if the parking assist ECU judges that there is an internal malfunction as a result of its self check.

HINT:

The parking assist ECU stores different types of information during initialization. If the parking assist ECU cannot read the stored information when activated, the parking assist ECU judges that there is an internal malfunction and stores this DTC.


DTC No. Detection Item DTC Detection Condition Trouble Area Memory DTC Output from Priority
C1614 ECU Malfunction
·

Power source malfunction

·

System standby malfunction

·

Main EEPROM malfunction

·

Image ASIC RAM malfunction

·

ASIC status malfunction

·

ECU internal display line malfunction


Parking assist ECU ○ Circumference Monitoring Camera Control Module A

CAUTION / NOTICE / HINT

NOTICE:
·

When "!" mark is displayed on the parking assist ECU after the cable is disconnected from the negative (-) auxiliary battery terminal, correct the steering angle neutral point.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (w/o Advanced Park)>INITIALIZATION

·

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (w/o Advanced Park)>CALIBRATION



PROCEDURE

1.READ VALUE USING GTS (PARKING ASSIST ECU STATUS)
a.

Use the Data List to check if the parking assist ECU status is functioning properly.

HINT:

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (w/o Advanced Park)>DATA LIST / ACTIVE TEST


Chassis > Circumference Monitoring Camera Control Module > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Image Processing IC Written Protect Record A history item indicating that the image processing IC memory was write protected Unrec/Rec Unrec: Parking assist ECU normal
Rec: Parking assist ECU abnormal
-
Image Processing IC Initialized Malfunction Record A history item indicating that the image processing IC memory was not initialized Unrec/Rec Unrec: Parking assist ECU normal
Rec: Parking assist ECU abnormal
-
Main EEPROM Access Status Main EEPROM access status OK/NG OK: Parking assist ECU normal
NG: Parking assist ECU abnormal
-
System Power Supply Voltage Malfunction Record A history item indicating an abnormally generated voltage value from the system power source Unrec/Rec Unrec: Parking assist ECU normal
Rec: Parking assist ECU abnormal
-
Main CPU Starting Malfunction Record A history item indicating that the main CPU did not start Unrec/Rec Unrec: Parking assist ECU normal
Rec: Parking assist ECU abnormal
-
Chassis > Circumference Monitoring Camera Control Module > Data List
Tester Display
Image Processing IC Written Protect Record
Image Processing IC Initialized Malfunction Record
Main EEPROM Access Status
System Power Supply Voltage Malfunction Record
Main CPU Starting Malfunction Record
50003 353 13,14,15,17,18

Result:
Result Proceed to
OK or Unrec is displayed for all items A
NG or Rec is displayed B



A

B

2.CLEAR DTC
2.CLEAR DTC
a.

Clear the DTCs.

HINT:

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (w/o Advanced Park)>DTC CHECK / CLEAR


Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
50002 353
Result:
Proceed to
NEXT




NEXT

3.CHECK FOR DTC
3.CHECK FOR DTC
a.

Check for DTCs.

HINT:

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (w/o Advanced Park)>DTC CHECK / CLEAR


Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
50001 353
Result:
Result Proceed to
DTCs are not output A
C1614 is output B


HINT:
·

If DTC C1614 is output, perform the procedure to allow the parking assist ECU to store the vehicle information again.

·

If DTC C1614 is still output after performing the procedure to make the parking assist ECU store the vehicle information 3 times, replace the parking assist ECU.

·

If DTC C1614 is output frequently, replace the parking assist ECU even though the DTC is not output when rechecking for DTCs.





A

END

B