Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM (w/o Advanced Park) › from 2021.07
RM3700E _56 Audio / Visual / Telematics _093031 PARK ASSIST / MONITORING _0485737 PANORAMIC VIEW MONITOR SYSTEM(w/o Advanced Park) C

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM(w/o Advanced Park)  C1625  Open or Short in Steering Angle Sensor +B  


DESCRIPTION

This DTC is stored if the parking assist ECU receives a signal via CAN communication from the steering sensor that indicates a power supply system problem.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
C1625 Open or Short in Steering Angle Sensor +B Open or short in steering angle sensor +B
·

Harness or connector

·

Steering sensor


Circumference Monitoring Camera Control Module A

WIRING DIAGRAM

C402935E09
5.323,2.083 6.698,2.281 1.375,0.198 10 false Parking Assist ECU 3.406,0.635 4.781,0.833 1.375,0.198 10 false BAT 3.396,1.042 4.771,1.24 1.375,0.198 10 false IGR 3.406,1.438 4.781,1.635 1.375,0.198 10 false ESS 0.323,1.031 2.094,1.25 1.771,0.219 10 false from IGR-NO. 1 Relay 0.385,0.615 2.063,0.813 1.677,0.198 10 false from Auxiliary Battery 0.667,2.344 2.344,2.542 1.677,0.198 10 false : CAN Communication Line 3.156,0.531 3.448,0.729 0.292,0.198 10 false 4 3.156,0.927 3.448,1.125 0.292,0.198 10 false 9 3.156,1.323 3.448,1.521 0.292,0.198 10 false 6 3.417,1.865 4.792,2.063 1.375,0.198 10 false H39 3.417,2.021 5.271,2.302 1.854,0.281 10 false Steering Sensor 2.104,1.198 3.177,1.406 1.073,0.208 10 false ECU-IGR NO. 1 2.083,0.802 3.135,1.01 1.052,0.208 10 false ECU-DCC NO. 1 0.115,0.094 3.604,0.333 3.49,0.24 12 false for Gasoline Model:

C402935E10
5.323,2.083 6.698,2.281 1.375,0.198 10 false Parking Assist ECU 3.396,0.646 4.771,0.844 1.375,0.198 10 false BAT 3.396,1.042 4.771,1.24 1.375,0.198 10 false IG 3.396,1.438 4.771,1.635 1.375,0.198 10 false ESS 0.365,1.031 2.083,1.229 1.719,0.198 10 false from IGR-NO. 1 Relay 0.375,0.625 2.052,0.823 1.677,0.198 10 false from Auxiliary Battery 0.667,2.344 2.344,2.542 1.677,0.198 10 false : CAN Communication Line 3.156,0.531 3.448,0.729 0.292,0.198 10 false 4 3.156,0.927 3.448,1.125 0.292,0.198 10 false 9 3.156,1.323 3.448,1.521 0.292,0.198 10 false 6 3.417,1.865 4.792,2.063 1.375,0.198 10 false H39 3.417,2.021 5.271,2.302 1.854,0.281 10 false Steering Sensor 2.104,1.198 3.135,1.396 1.031,0.198 10 false ECU-IGR NO. 1 2.073,0.802 3.146,1.021 1.073,0.219 10 false ECU-DCC NO. 1 0.115,0.094 3.604,0.333 3.49,0.24 12 false for HV Model:

CAUTION / NOTICE / HINT

NOTICE:
·

Since the panoramic view monitor system has functions that use the CAN communication system, first confirm that there is no malfunction in the communication system by inspecting the CAN communication functions in accordance with the "How to Proceed with Troubleshooting" procedures. Then, conduct the following procedure.

for HV Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING

for Gasoline Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>HOW TO PROCEED WITH TROUBLESHOOTING

·

When "!" mark is displayed on the parking assist ECU after the cable is disconnected from the negative (-) auxiliary battery terminal, correct the steering angle neutral point.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (w/o Advanced Park)>INITIALIZATION

·

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM (w/o Advanced Park)>CALIBRATION

·

Inspect the fuses for circuits related to this system before performing the following procedure.

·

The vehicle is equipped with a Supplemental Restraint System (SRS) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the precaution for Supplemental Restraint System.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION



PROCEDURE

1.CHECK VEHICLE TYPE
a.

Check the vehicle specifications.


Result:
Result Proceed to
for Gasoline Model A
for HV Model B



A

2.CHECK HARNESS AND CONNECTOR (STEERING SENSOR - AUXILIARY BATTERY AND BODY GROUND)

B

3.CHECK HARNESS AND CONNECTOR (STEERING SENSOR - AUXILIARY BATTERY AND BODY GROUND)
2.CHECK HARNESS AND CONNECTOR (STEERING SENSOR - AUXILIARY BATTERY AND BODY GROUND)

Pre-procedure1

a.

Disconnect the H39 steering sensor connector.


Procedure1

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H39)Location & Routing

Click Connector(H39)Instrument Panel>Instrument Panel Wire / Speaker Wire>Spiral Cable Sub-Assembly

H39-6 (ESS) - Body ground Always Below 1 Ω



b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition

Click Location & Routing(H39)Location & Routing

Click Connector(H39)Instrument Panel>Instrument Panel Wire / Speaker Wire>Spiral Cable Sub-Assembly

H39-9 (IGR) - H39-6 (ESS) Ignition switch ON 11 to 14 V
H39-4 (BAT) - H39-6 (ESS) Ignition switch off 11 to 14 V


Result:
Proceed to
OK
NG



Post-procedure1

a.

None



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK HARNESS AND CONNECTOR (STEERING SENSOR - AUXILIARY BATTERY AND BODY GROUND)

Pre-procedure1

a.

Disconnect the H39 steering sensor connector.


Procedure1

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H39)Location & Routing

Click Connector(H39)Instrument Panel>Instrument Panel Wire / Speaker Wire>Spiral Cable Sub-Assembly

H39-6 (ESS) - Body ground Always Below 1 Ω



b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition

Click Location & Routing(H39)Location & Routing

Click Connector(H39)Instrument Panel>Instrument Panel Wire / Speaker Wire>Spiral Cable Sub-Assembly

H39-9 (IG) - H39-6 (ESS) Ignition switch ON 11 to 14 V
H39-4 (BAT) - H39-6 (ESS) Ignition switch off 11 to 14 V


Result:
Proceed to
OK
NG



Post-procedure1

a.

None



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR