Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM › from 2021.07
RM3700E _58 Vehicle Interior _093748 THEFT DETERRENT / KEYLESS ENTRY _0485975 THEFT DETERRENT SYSTEM Y

THEFT DETERRENT / KEYLESS ENTRY  THEFT DETERRENT SYSTEM  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Use this procedure to troubleshoot the theft deterrent system.

·

*: Use the GTS.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS

Result:
Proceed to
NEXT



NEXT

3.READ OUT AND SAVE VEHICLE CONTROL HISTORY (ROB)
3.READ OUT AND SAVE VEHICLE CONTROL HISTORY (ROB)
a.

Read out and save vehicle control history (RoB) using the GTS.

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>THEFT DETERRENT SYSTEM>CHECK FOR INTERMITTENT PROBLEMS

Body Electrical > Main Body > Utility
Tester Display
Vehicle Control History (RoB)
50005 449 62

Result:
Proceed to
NEXT



NEXT

4.PRE-CHECK
4.PRE-CHECK
a.

Measure the auxiliary battery voltage with the ignition switch off.

Standard voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.


b.

Check the fuses and relays.


c.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.


Result:
Proceed to
NEXT



NEXT

5.SYMPTOM SIMULATION
5.SYMPTOM SIMULATION
Result:
Proceed to
NEXT



NEXT

6.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
6.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
a.

Use the GTS to check if the CAN communication system is functioning normally.

for HV Model:

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>DIAGNOSIS SYSTEM

for Gasoline Model:

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>DIAGNOSIS SYSTEM


Result:
Result Proceed to
CAN communication system DTC is not output A
CAN communication system DTC is output B



A

7.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*

B

7.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
a.

Use the GTS to check if the LIN communication system is functioning normally.

Click herePower Source / Network>NETWORKING>LIN COMMUNICATION SYSTEM>DTC CHECK / CLEAR


Result:
Result Proceed to
LIN communication system DTC is not output A
LIN communication system DTC is output B



A

8.CHECK POWER DOOR LOCK CONTROL SYSTEM

B

8.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Refer to the power door lock control system.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>OPERATION CHECK


Result:
Result Proceed to
Power door lock control system is normal A
Power door lock control system is abnormal B



A

9.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

B

9.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

Result:
Result Proceed to
Wireless door lock control system is normal A
Wireless door lock control system is abnormal B



A

10.CHECK ENTRY AND START SYSTEM (for Entry Function)

B

10.CHECK ENTRY AND START SYSTEM (for Entry Function)
a.

Refer to the entry and start system (for Entry Function).

for HV Model:

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Entry Function, HV Model)>OPERATION CHECK

for Gasoline Model:

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Entry Function, Gasoline Model)>OPERATION CHECK

Result:
Result Proceed to
Entry and start system (for Entry Function) is normal A
Entry and start system (for Entry Function) is abnormal B




A

11.CHECK ENTRY AND START SYSTEM (for Start Function)

B

11.CHECK ENTRY AND START SYSTEM (for Start Function)
a.

Refer to the entry and start system (for Start Function).

for HV Model:

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function, HV Model)>OPERATION CHECK

for Gasoline Model:

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function, Gasoline Model)>OPERATION CHECK

Result:
Result Proceed to
Entry and start system (for Start Function) is normal A
Entry and start system (for Start Function) is abnormal B




A

12.CHECK LIGHTING SYSTEM (EXT)

B

12.CHECK LIGHTING SYSTEM (EXT)

Result:
Result Proceed to
Lighting system (EXT) is normal A
Lighting system (EXT) is abnormal B



A

13.CHECK LIGHTING SYSTEM (INT)

B

13.CHECK LIGHTING SYSTEM (INT)
a.

Refer to the lighting system (INT).

Click hereVehicle Interior>LIGHTING (INT)>LIGHTING SYSTEM>OPERATION CHECK


Result:
Result Proceed to
Lighting system (INT) is normal A
Lighting system (INT) is abnormal B



A

14.CHECK HORN SYSTEM

B

14.CHECK HORN SYSTEM
a.

Refer to the horn system.

Click hereVehicle Exterior>HORN>HORN SYSTEM>PROBLEM SYMPTOMS TABLE


Result:
Result Proceed to
Horn system is normal A
Horn system is abnormal B



A

15.PROBLEM SYMPTOMS TABLE

B

15.PROBLEM SYMPTOMS TABLE

Result:
Result Proceed to
Fault is not listed in Problem Symptoms Table (Fault can be simulated) A
Fault is not listed in Problem Symptoms Table (Fault cannot be simulated) B
Fault is listed in Problem Symptoms Table C



A

16.PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM*

B

C

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE

16.PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM*

NEXT

17.ADJUST, REPAIR OR REPLACE
17.ADJUST, REPAIR OR REPLACE
Result:
Proceed to
NEXT



NEXT

18.CONFIRMATION TEST
18.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END