Home › Drivetrain › P910 (HYBRID TRANSMISSION / TRANSAXLE) › TRANSMISSION CONTROL CABLE › from 2021.07
RM3700E _52 Drivetrain _093735 P910 HYBRID TRANSMISSION / TRANSAXLE _0441815 TRANSMISSION CONTROL CABLE N

P910 HYBRID TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  ADJUSTMENT  


PROCEDURE

Hide 1.SECURE VEHICLE

a.

Fully apply the parking brake and chock a wheel.

CAUTION:
C332327

·

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 58910C 2.REMOVE REAR CONSOLE BOX ASSEMBLY

Hide 3.ADJUST SHIFT LEVER POSITION

NOTICE:

Before adjusting the transmission control cable assembly, check that the shift lever position sensor and shift lever are in N.


a.
C463310C01
2.5,1.125 2.198,0.865 true 1.969,1.406 1.781,1.094 true 2.51,1.167 2.729,1.375 0.219,0.208 10 true *1 1.938,1.438 2.167,1.656 0.229,0.219 10 true *2
*1 Adjuster Case
*2 Adjuster Case Cover


Slide the adjuster case cover in the direction shown by the arrow.


b.
C463311C01
2.208,0.833 2.604,0.927 true 2.333,1.448 2.021,1.021 true 2.667,0.854 2.917,1.021 0.25,0.167 10 true *1 2.344,1.5 2.594,1.667 0.25,0.167 10 true *2
*1 Adjuster Case
*2 Lock Piece


Using a precision screwdriver, pull out the lock piece of the adjuster case.


c.
C463312C01
2.625,0.938 2.208,0.833 true 2.323,1.333 1.99,1.031 true 2.688,0.865 2.917,1.052 0.229,0.188 10 true *1 2.354,1.385 2.583,1.573 0.229,0.188 10 true *2
*1 Adjuster Case
*2 Lock Piece


Push in the lock piece of the adjuster case to lock it.

NOTICE:
C414647C05
1.271,0.333 1.604,0.333 false 2.333,1.667 2.583,1.167 2.583,1.167 2.75,1.167 true 2.781,1.063 3.094,1.219 0.313,0.156 10 false *1 1.646,0.24 1.958,0.396 0.313,0.156 10 false *2
*1 Transmission Control Cable Assembly
*2 Lever Shaft


·

When pushing in the lock piece of the adjuster case to lock it, remove your hand from the lever shaft.

·

When pushing in the lock piece of the adjuster case to lock it, do not move the lever shaft or transmission control cable assembly forward or backward.




d.
C463313C01
1.781,1.385 1.771,1.104 true 2.615,1.042 2.208,0.865 true 2.667,1 2.865,1.208 0.198,0.208 10 true *1 1.708,1.427 1.917,1.625 0.208,0.198 10 true *2
*1 Adjuster Case
*2 Adjuster Case Cover


Move the adjuster case cover in the direction shown by the arrow.

NOTICE:

If the adjuster case cover is not moved far enough so that the adjuster case cover engages the lock piece, the cable will not be able to lock, and reliable shift operation will not be possible.



Hide 58910C 4.INSTALL REAR CONSOLE BOX ASSEMBLY