Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SYSTEM (for Gasoline Model TMMF Made) › from 2021.07
RM3700E _54 Brake _093729 PARKING BRAKE _0483555 ELECTRIC PARKING BRAKE SYSTEM(for Gasoline Model TMMF Made) J

PARKING BRAKE  ELECTRIC PARKING BRAKE SYSTEM(for Gasoline Model TMMF Made)  Electric Parking Brake AUTO OFF Indicator Light Does Not Illuminate/turn off When AUTO Function Set to ON/OFF  


DESCRIPTION

The AUTO OFF indicator light in the combination meter assembly turns on/off when the AUTO function is set to ON/OFF.

WIRING DIAGRAM

C403409E03
1.177,0.583 4.5,1.021 3.323,0.438 10 false Skid Control ECU (Brake Actuator Assembly) 1.167,0.979 5.365,1.438 4.198,0.458 10 false - Electric Parking Brake AUTO OFF Indicator Light Request Signal 1.177,2.583 4.5,3.021 3.323,0.438 10 false Combination Meter Assembly 1.177,2.979 4.635,3.469 3.458,0.49 10 false - Electric Parking Brake AUTO OFF Indicator Light 0.844,4.156 4.167,4.594 3.323,0.438 10 false : CAN Communication Line

CAUTION / NOTICE / HINT

NOTICE:
·

The electric parking brake may still operate up to 20 seconds after the ignition switch is turned off. Before disconnecting connectors or fuses, turn the ignition switch off and wait 20 seconds or more.

·

After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model TMMF Made)>UTILITY

·

When replacing the skid control ECU (brake actuator assembly), operate the electric parking brake switch assembly, as the parking brake indicator light (red) blinks when the ignition switch is first turned ON.



PROCEDURE

1.CHECK OPERATION OF AUTO FUNCTION
a.

Check that the AUTO function operates when the operating conditions are met.

HINT:

Do not use the multi-information display to determine whether the AUTO function is operating or not.



Result:
Result Proceed to
The AUTO function operates A
The AUTO function does not operate B



A

REPLACE COMBINATION METER ASSEMBLY

B