Home › Vehicle Exterior › BODY PANEL › FRONT BODY PILLAR › 2011.08–2017.01
BM19S0E _01 Vehicle Exterior _054879 BODY WELD POINT _0267231 FRONT BODY PILLAR F

BODY WELD POINT  FRONT BODY PILLAR  CUT AND JOIN REPLACEMENT SECTIONS  


K100688

With the cowl top side upper panel removed.


REMOVAL


Symbol meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.
K108827

Cut and Join Location
K108828

Cut Location for Supply Parts


REMOVAL POINT
1.

Carefully cut the rocker reinforce outer so not to damage *1.

2.

*2 indicates the location of the foamed sealing material. Be careful when cutting as the foamed sealing material is located near the cutting position.


U135351E04
4.729,4.479 4.917,4.063 4.917,4.063 5.042,4.063 false 4.917,4.063 4.833,4.521 false 4.094,4.948 4.354,5.792 4.354,5.792 4.604,5.792 false 3.26,3.469 3.375,3.625 0.115,0.156 10 false 2 0.604,3.813 0.719,3.969 0.115,0.156 10 false 2 1.344,6.083 1.458,6.24 0.115,0.156 10 false 2 0.563,4.313 0.677,4.469 0.115,0.156 10 false 4 2.052,6.208 2.167,6.365 0.115,0.156 10 false 4 2.792,6.208 2.906,6.365 0.115,0.156 10 false 3 3.135,4.938 3.25,5.094 0.115,0.156 10 false 2 2.021,8.208 2.135,8.365 0.115,0.156 10 false 2 2.917,3.698 3.031,3.854 0.115,0.156 10 false 1 4.677,3.958 4.792,4.115 0.115,0.156 10 false 1 2.469,4.958 2.583,5.115 0.115,0.156 10 false 1 0.531,4.885 0.646,5.042 0.115,0.156 10 false 1 2.427,3.698 2.542,3.854 0.115,0.156 10 false 1 2.771,4.719 2.885,4.875 0.115,0.156 10 false 1 0.865,3.375 0.969,3.531 0.104,0.156 10 false 3 0.729,5.573 0.927,5.729 0.198,0.156 10 false 10 5.073,4 5.24,4.146 0.167,0.146 10 false *1 4.229,1 4.958,1.177 0.729,0.177 10 false 100 (3.94) 4.969,6.938 5.729,7.115 0.76,0.177 10 false 340 (13.39) 0.354,9.51 0.885,9.677 0.531,0.167 10 false mm (in.) 4.667,5.729 6.188,6.104 1.521,0.375 10 false ROCKER REINFORCE OUTER

U135352E03
4.833,6.438 4.719,5.844 4.719,5.844 4.594,5.844 false 1.469,0.948 1.583,1.104 0.115,0.156 10 false 4 2.823,3.281 2.938,3.438 0.115,0.156 10 false 1 2.823,2.135 2.927,2.292 0.104,0.156 10 false 3 2.875,2.813 2.979,2.969 0.104,0.156 10 false 3 4.375,5.75 4.573,6 0.198,0.25 10 false *2 4.063,6.76 4.792,6.938 0.729,0.177 10 false 200 (7.87) 0.354,9.51 0.885,9.677 0.531,0.167 10 false mm (in.)

INSTALLATION


Symbol meaning
K108818

Remove Weld Points
K108821

Spot Weld
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108827

Cut and Join Location
K108830

Fillet Weld
K108831

Butt Weld
K108834

Body Sealer


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

If the entire supply part is not needed, remove the part of the supply part that is needed.

4.

Before installing a new part, apply body sealer.

HINT:

Apply body sealer in an even, continuous bead.


5.

Before temporarily installing the new parts, weld the rocker reinforce outer, front body pillar reinforce lower, front body pillar inner and front body pillar upper outer with the standard number of welding points.

6.

When welding *1, make a hole on a new part for plug welding and weld the panel with the panel.

7.

*2 indicates the location of the foamed sealing material. Be careful when welding as the foamed sealing material is located near the area that is cut and joined together.

8.

After welding the rocker reinforce outer, front body pillar reinforce lower, front body pillar inner and front body pillar upper outer to the vehicle side, install the *3.

9.

After welding, apply the foamed sealing material to the corresponding parts. (See the painting / coating)

10.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

11.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


U158802E03
2.885,3.063 2.719,3.583 2.719,3.583 2.417,3.583 false 5.979,7.958 5.51,7.958 false 1.198,7.521 1.667,7.521 false 2.385,0.667 2.5,0.823 0.115,0.156 10 false 1 4.563,3.625 4.677,3.781 0.115,0.156 10 false 2 2.865,3.354 3.594,3.531 0.729,0.177 10 false 195 (7.68) 0.354,9.51 0.885,9.677 0.531,0.167 10 false mm (in.) 1.688,6.865 2.469,7.042 0.781,0.177 10 false 290 (11.42) 1.052,9.208 1.833,9.385 0.781,0.177 10 false 140 (5.51) 4.656,6.74 5.438,6.917 0.781,0.177 10 false 200 (7.87) 0.365,3.5 2.469,3.875 2.104,0.375 10 false ROCKER REINFORCE OUTER 1.729,7.448 4.302,7.854 2.573,0.406 10 false FRONT BODY PILLAR UPPER OUTER 3.563,7.875 5.542,8.281 1.979,0.406 10 false FRONT BODY PILLAR INNER

K132086E02
1.427,0.667 1.094,0.667 1.094,0.667 1.448,1.531 false 1.5,0.583 4.427,1 2.927,0.417 10 false FRONT BODY PILLAR REINFORCE LOWER 0.771,3.406 1.76,3.833 0.99,0.427 10 false 10 (0.39) 6.479,6.865 7.156,7.292 0.677,0.427 10 false 12 (0.47) 6.292,8.073 7.156,8.479 0.865,0.406 10 false 10 (0.39) 0.271,9.469 1.271,9.875 1,0.406 10 false mm (in.)

K132087E02
6.833,4.51 6.667,4.51 6.667,4.51 6.51,3.74 false 1.917,6.729 2.083,6.417 2.083,6.417 2.25,6.417 false 2.688,2.208 3,2.406 0.313,0.198 10 false *1 6.875,4.438 7.104,4.604 0.229,0.167 10 false *3 2.292,6.333 2.604,6.531 0.313,0.198 10 false *2 6.344,8.906 6.656,9.104 0.313,0.198 10 false *1 0.313,9.5 1.188,9.875 0.875,0.375 10 false mm (in.) 1.469,9.521 2.406,9.875 0.938,0.354 10 false 15 (0.59) 2.073,9.646 3.323,9.875 1.25,0.229 10 false 10 (0.39) 2.75,9.521 3.823,9.875 1.073,0.354 10 false 15 (0.59)