Home › Vehicle Exterior › BODY PANEL › ROCKER OUTER PANEL(for 5 Door)
BM19S0E _01 Vehicle Exterior _054879 BODY WELD POINT _0267242 ROCKER OUTER PANEL(for 5 Door) F

BODY WELD POINT  ROCKER OUTER PANEL(for 5 Door)  CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)  


K100690

REMOVAL


Symbol meaning
K108818

Remove Weld Points
K108827

Cut and Join Location
K108828

Cut Location for Supply Parts


U135362E03
4.397,1.849 4.507,2.001 0.111,0.152 10 7 4.397,3.03 4.507,3.181 0.111,0.152 10 5 2.3,4.173 2.410,4.324 0.111,0.152 10 1 1.198,3.594 1.308,3.745 0.111,0.152 10 1 4.451,1.592 5.214,1.768 0.764,0.177 10 350 (13.78) 0.356,9.506 0.889,9.671 0.533,0.165 10 mm (in.)

INSTALLATION


Symbol meaning
K108823

Plug Weld
K108831

Butt Weld


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K132094E01
4.833,5.833 4.667,5.833 4.667,5.833 4.5,4.917 false 4.917,5.75 6.667,6.25 1.75,0.5 10 false ROCKER PANEL OUTER