Home › Vehicle Exterior › BODY PANEL › BACK DOOR OPENING TROUGH
BM19S0E _01 Vehicle Exterior _054879 BODY WELD POINT _0267250 BACK DOOR OPENING TROUGH F

BODY WELD POINT  BACK DOOR OPENING TROUGH  ASSEMBLY REPLACEMENT  


K100567

With the body lower back panel removed.


REMOVAL


Symbol meaning
K108819

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.


K132629

INSTALLATION


Symbol meaning
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K132126E01
3.031,2.25 3.333,1.417 3.333,1.417 3.5,1.417 false 2.667,4.583 2.5,4.583 2.5,4.583 3.333,3.333 false 3.583,1.333 6.135,1.938 2.552,0.604 10 false BACK DOOR OPENING TROUGH 2.719,4.5 6.385,5 3.667,0.5 10 false BACK DOOR OPENING REINFORCEMENT LOWER