Home › Vehicle Exterior › BODY PANEL › QUARTER PANEL EXTENSION
BM19S0E _01 Vehicle Exterior _054879 BODY WELD POINT _0267251 QUARTER PANEL EXTENSION F

BODY WELD POINT  QUARTER PANEL EXTENSION  CUT AND JOIN REPLACEMENT SECTIONS  


K100568

With the quarter panel and back door opening trough removed.


REMOVAL


Symbol meaning
K108820

Remove Weld Points
K108827

Cut and Join Location


U135335E03
4.318,5.5 4.423,5.652 0.105,0.152 10 4 2.588,3.942 3.320,4.119 0.732,0.177 10 130 (5.12) 0.356,9.506 0.889,9.671 0.533,0.165 10 mm (in.)

INSTALLATION


Symbol meaning
K108825

Plug Weld
K108831

Butt Weld


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K132127E01
2.167,7 2,7 2,7 2.5,5.833 false 2.25,6.917 4.906,7.406 2.656,0.49 10 false QUARTER PANEL EXTENSION UPPER