Home › Vehicle Exterior › BODY DIMENSIONS › ENGINE COMPARTMENT
BM19S0E _01 Vehicle Exterior _054880 BODY DIMENSIONS _0267266 ENGINE COMPARTMENT F

BODY DIMENSIONS  ENGINE COMPARTMENT  THREE-DIMENSIONAL DISTANCE  


HINT:
·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Front Fender Installation Nut M6 (0.24)
B, b Front Spring Support Standard Hole φ11 (0.43)
C, c Hood Hinge Installation Nut M8 (0.31)
D Cowl Top Inner Panel Center Mark -
E, e Front Side Member Standard Hole φ15 (0.59)
F, f Front Side Member Standard Hole φ10 (0.39)
G, g Radiator Seal Installation Hole φ8 (0.31)
H, h Front Bumper Reinforcement Installation Nut M10 (0.39)
j Radiator Support Brace Installation Nut M6 (0.24)
K, k Front Fender Mounting Bracket Standard Hole φ10 (0.39)
L, l Hood Cushion Installation Hole φ15 (0.59)
M, m Headlight Installation Hole 9X9 (0.35X0.35)

K132154E01
0.625,7.667 3.604,8.292 2.979,0.625 10 false Distance between points other than those above 4.125,7.667 6.323,8.156 2.198,0.49 10 false Height from Imaginary Datum Line 0.563,9.25 0.833,9.875 0.271,0.625 10 false mm (in.)