Home › Vehicle Exterior › BODY DIMENSIONS › FRONT DOOR(for 3 Door)
BM19S0E _01 Vehicle Exterior _054880 BODY DIMENSIONS _0267267 FRONT DOOR(for 3 Door) F

BODY DIMENSIONS  FRONT DOOR(for 3 Door)  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Use specification *1 when performing centering measurements for the body dimensions.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Roof Panel Corner -
B, b Hood Hinge Installation Nut M8 (0.31)
C, c Front Door Hinge Installation Nut M8 (0.31)
D, d Front Door Hinge Installation Nut M8 (0.31)
E, e Front Body Pillar Assembly Mark -
F, f Front Body Pillar Assembly Mark -
G, g Front Body Pillar Assembly Mark -
H, h Rocker Panel Corner -
J, j Rocker Panel Assembly Mark -
K, k Roof Side Rail Assembly Mark -
L, l Quarter Panel Assembly Mark -
M, m Quarter Panel Assembly Mark -
N, n Front Door Lock Striker Installation Nut M8 (0.31)
O, o Front Floor Crossmember Standard Hole φ13 (0.51)
*1 Front Floor Panel Standard Hole φ15 (0.59)

K132155E01
0.396,7.125 3.438,7.583 3.042,0.458 10 false Distance between points other than those above 0.406,9.302 0.677,9.875 0.271,0.573 10 false mm (in.)

K132156E01
1.594,7.927 5.365,8.5 3.771,0.573 10 false Distance between points other than those above 0.333,9.323 0.604,9.875 0.271,0.552 10 false mm (in.)