Home › Vehicle Exterior › PAINTING / COATING › BODY PANEL SEALING › 2011.08–2017.01
BM19S0E _01 Vehicle Exterior _054881 PAINTING / COATING _0267278 BODY PANEL SEALING F

PAINTING / COATING  BODY PANEL SEALING  APPLICATION AREAS  


1.

Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

HINT:
·

Apply degreasing agent to a clean cloth and clean the sealer application areas.

·

After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rust-proof the areas by applying primer or equivalent. Then apply body sealer.

·

If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.




K110022

Flat Finishing
K110023

No Flat Finishing

K101429

K132144E01
0.333,0.333 1.917,0.802 1.583,0.469 12 false for Standard Roof: 3,0.333 4.583,0.802 1.583,0.469 12 false for Glass Roof:

U158772E01
1.985,5.728 2.080,5.888 0.095,0.161 10 d 0.752,6.526 1.056,6.682 0.303,0.156 10 d - d 1.995,5.184 2.090,5.345 0.095,0.162 10 d

K101431E03
0.25,0.26 2.26,0.75 2.01,0.49 12 false for 3 Door:

K100679E04
0.25,0.25 2.26,0.74 2.01,0.49 12 false for 5 Door:

K100680