Home › Drivetrain › U441E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM
NM19S0E _52 Drivetrain _051409 U441E AUTOMATIC TRANSMISSION / TRANSAXLE _0247876 AUTOMATIC TRANSAXLE SYSTEM UN GENERAL/CONTROL/DETAILS F

U441E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The U441E 4-speed Super Electronically Controlled Transaxle (Super ECT) is used on the models with 2NZ-FE engine.


b.

A gate type shift lever is used.


c.

A shift lock system is used.



SPECIFICATION


a.

Automatic Transaxle Assembly

Gear Ratio 1st 2.875
2nd 1.568
3rd 1.000
4th 0.696
Reverse 2.300
Differential Gear Ratio*1 4.375
Fluid Capacity*2 5.6 Liters (5.9 US qts, 4.9 Imp. qts)
Fluid Type TOYOTA Genuine ATF Type T-IV
Weight (Reference) *3 56.3 kg (123.8 lb)

HINT:

*1: Counter gear ratio included.

*2: Differential included.

*3: The weight shown is the weight of the part fully filled with fluid.



b.

Friction Engagement Components and 1-way Clutch

C1 Forward Clutch No. of Discs 4
C2 Direct Clutch 2
C3 Reverse Clutch 2
B1 OD and 2nd Brake 2
B2 2nd Brake 2
B3 1st and Reverse Brake 4
F1 No. 1 1-way Clutch No. of Sprags 12
F2 No. 2 1-way Clutch No. of Rollers 15


c.

Planetary Gear and Counter Gear

Planetary Gear No. of Planetary Sun Gear Teeth 24
No. of Rear Planetary Sun Gear Teeth 30
No. of Long Pinion Gear Teeth 20
No. of Short Pinion Gear Teeth 19
No. of Planetary Ring Gear Teeth 69
Counter Gear No. of Counter Drive Gear Teeth 44
No. of Counter Driven Gear Teeth 45


d.

Torque Converter Assembly

Torque Converter Type 3-element, 1-step, 2-phase (With Lock-up Mechanism)
Stall Torque Ratio 2.0