Home › Drivetrain › AXLE AND DIFFERENTIAL › AXLE SYSTEM
NM19S0E _52 Drivetrain _051413 AXLE AND DIFFERENTIAL _0247880 AXLE SYSTEM UN GENERAL/CONTROL/DETAILS F

AXLE AND DIFFERENTIAL  AXLE SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

Front Axle

i.

The front axle uses a double-row angular ball bearing which offers low rolling resistance.


ii.

A 12-point lock nut is used for the front axle shaft nut. Secure and solid fastening is achieved by staking the nut. Once removed, this nut cannot be reused.


iii.

Due to an active type front speed sensor being adopted, a sensor rotor is provided on the hub bearing inner race.

X105956E04
4.375,1.906 5.115,1.313 5.115,1.313 5.438,1.313 true 4.521,2.26 5.01,2.667 5.01,2.667 5.406,2.667 true 4.042,2.417 4.469,3.219 4.469,3.219 5.49,3.219 true 4.156,2.406 4.604,3.219 true 3.906,2.469 3.354,2.823 3.354,2.823 1.313,2.823 true 5.51,1.208 6.292,1.583 0.781,0.375 10 false *1 5.531,3.073 6.313,3.448 0.781,0.375 10 false *2 1.125,2.708 1.906,3.083 0.781,0.375 10 false *3 5.469,2.552 6.25,2.927 0.781,0.375 10 false *4

Text in Illustration
*1 Front Axle Hub Sub-assembly *2 Double-row Angular Ball Bearing
*3 Sensor Rotor *4 Front Axle Shaft Nut



b.

Rear Axle

i.

The rear axle uses a double-row angular ball bearing which offers low rolling resistance.


ii.

Due to the use of an active type rear speed sensor (skid control sensor wire), a sensor rotor is provided on the outer circumference of the hub bearing inner race.

X106117E04
3.865,1.781 3.385,0.74 3.385,0.74 2.917,0.74 true 4.063,2.26 4.333,2.583 4.333,2.583 4.479,2.583 true 3.354,2.271 2.802,3.292 2.802,3.292 2.656,3.292 true 3.083,0.74 3.573,1.781 true 2.719,0.615 3.177,0.917 0.458,0.302 10 false *2 4.563,2.469 5.021,2.771 0.458,0.302 10 false *1 2.479,3.177 2.938,3.479 0.458,0.302 10 false *3

Text in Illustration
*1 Rear Axle Hub and Bearing Assembly *2 Double-row Angular Ball Bearing
*3 Sensor Rotor - -