Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM › 2011.08–2014.07
NM19S0E _53 Suspension _051414 FRONT SUSPENSION _0247881 FRONT SUSPENSION SYSTEM UN GENERAL/CONTROL/DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Front Suspension Support Sub-Assembly and Front Coil Spring

i.

The front suspension support sub-assembly has been adopted the construction that the support is connected in one point. As a result, a compact and lightweight construction is offered.


ii.

A pigtail type of front coil spring is used where the top and bottom diameters are different, creating a compact and lightweight construction. Lateral force reduction springs are used to control the reaction force line of the front coil spring, and reduce the bending force applied to the front shock absorber assembly. This reduces suspension friction, delivering a very comfortable ride.

X105959E03
4.271,2.427 4.438,2.115 4.438,2.115 4.667,2.115 true 3.896,1.458 4.458,0.906 4.458,0.906 4.688,0.906 true 3.438,1.552 2.865,0.969 2.865,0.969 2.646,0.969 true 3.375,2.323 2.74,1.948 2.74,1.948 2.521,1.948 true 3.417,2.958 2.938,3.323 2.938,3.323 2.708,3.323 true 4.74,2.01 5.01,2.26 0.271,0.25 10 false *3 4.75,0.792 5.021,1.042 0.271,0.25 10 false *1 2.458,0.875 2.729,1.125 0.271,0.25 10 false *2 2.354,1.865 2.625,2.115 0.271,0.25 10 false *4 2.521,3.208 2.792,3.458 0.271,0.25 10 false *5

Text in Illustration
*1 Front Suspension Support Sub-assembly *2 Strut Mounting Bearing
*3 Front Coil Spring *4 Front Spring Bumper
*5 Front Shock Absorber Assembly - -



b.

Front Shock Absorber Assembly

i.

In the front shock absorber assembly, a low-pressure N2 gas sealed type construction is used to suppress cavitations and a multi-leaf type liner control valve is also used to attain the linear damping force characteristics, offering both driving stability and riding comfort.

X106287E03
1.698,0.708 1.844,0.708 1.844,0.708 2.667,1.281 true 1.74,3.229 1.927,3.229 1.927,3.229 2.656,2.271 true 4.917,2.115 5.385,2.865 5.385,2.865 5.5,2.865 true 1.521,0.594 1.771,0.833 0.25,0.24 10 false *2 1.583,3.125 1.833,3.365 0.25,0.24 10 false *1 5.552,2.75 5.802,2.99 0.25,0.24 10 false *3

Text in Illustration
*1 Front Shock Absorber Assembly *2 Low-pressure N2 Gas
*3 Multi-leaf Type Linear Control Valve - -

NOTICE:

To prevent hazardous conditions, make sure to empty the gas from the shock absorber before discarding an N2 gas sealed shock absorber. For details, refer to the Repair Manual.



ii.

The multi-leaf type linear control valve has a structure consisting of several layered leaf valves with different diameter. Through use of the multi-leaf type linear control valve, changes in the damping force are made constant at low piston speeds, thus offering the excellent riding comfort and controllability.

X105961E02
3.719,1.635 3.375,1.156 3.375,1.156 3.229,1.156 true 4.906,1.646 5.229,1.125 5.229,1.125 5.375,1.125 true 1.542,3.99 3.896,4.24 2.354,0.25 10 false Multi-leaf Type Linear Control Valve 1.531,4.323 2.906,4.615 1.375,0.292 10 false Conventional Valve 5.74,2.833 6.76,3.073 1.021,0.24 10 false Piston Speed 0.292,0.24 3.042,0.521 2.75,0.281 12 false Damping Force Characteristics: 2.448,1.052 3.323,1.26 0.875,0.208 10 false Low Speed 5.427,1.021 7.042,1.292 1.615,0.271 10 false Medium and High Speed 0.583,1.917 2.635,2.271 2.052,0.354 10 false Extension Side Damping Force 0.417,3.104 2.708,3.417 2.292,0.313 10 false Compression Side Damping Force