Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM › 2014.07–2017.01
NM19S0E _53 Suspension _051414 FRONT SUSPENSION _0247881 FRONT SUSPENSION SYSTEM UN GENERAL/CONTROL/DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Front Suspension Support Sub-Assembly and Front Coil Spring

i.

The front suspension support sub-assembly has been adopted the construction that the support is connected in one point. As a result, a compact and lightweight construction is offered.


ii.

A pigtail type of front coil spring is used where the top and bottom diameters are different, creating a compact and lightweight construction. Lateral force reduction springs are used to control the reaction force line of the front coil spring, and reduce the bending force applied to the front shock absorber assembly. This reduces suspension friction, delivering a very comfortable ride.

X123302E02
3.719,1.552 4.281,1 4.281,1 4.375,1 true 3.302,1.448 2.74,0.896 2.74,0.896 2.635,0.896 true 4.188,2.083 4.75,1.531 4.75,1.531 4.844,1.531 true 3.781,2.302 4.74,2.771 4.74,2.771 4.833,2.771 true 3.438,3 2.479,3.469 2.479,3.469 2.375,3.469 true 4.906,1.427 5.177,1.677 0.271,0.25 10 false *3 2.458,0.792 2.729,1.042 0.271,0.25 10 false *1 4.427,0.875 4.698,1.125 0.271,0.25 10 false *2 4.896,2.646 5.167,2.896 0.271,0.25 10 false *4 2.198,3.375 2.469,3.625 0.271,0.25 10 false *5

Text in Illustration
*1 Front Suspension Support Sub-assembly *2 Strut Mounting Bearing
*3 Front Coil Spring *4 Front Spring Bumper
*5 Front Shock Absorber Assembly - -



b.

Front Shock Absorber Assembly

i.

In the front shock absorber assembly, a low-pressure N2 gas sealed type construction is used to suppress cavitations and a multi-leaf type liner control valve is also used to attain the blow off type damping force characteristics, offering both driving stability and riding comfort.

X115934E04
1.698,0.552 1.844,0.552 1.844,0.552 2.688,1.146 true 1.729,2.729 1.917,2.729 1.917,2.729 2.656,1.771 true 5.031,1.917 5.49,2.667 5.49,2.667 5.604,2.667 true 1.521,0.448 1.771,0.688 0.25,0.24 10 false *2 1.583,2.635 1.833,2.875 0.25,0.24 10 false *1 5.646,2.563 5.896,2.802 0.25,0.24 10 false *3

Text in Illustration
*1 Front Shock Absorber Assembly *2 Low-pressure N2 Gas
*3 Multi-leaf Type Linear Control Valve - -

NOTICE:

To prevent hazardous conditions, make sure to empty the gas from the shock absorber before discarding an N2 gas sealed shock absorber. For details, refer to the Repair Manual.



ii.

The multi-leaf type linear control valve has a structure consisting of several layered leaf valves with different diameter. Through use of the multi-leaf type linear control valve, changes in the damping force are made constant at high piston speeds, thus offering the excellent riding comfort and controllability.

X115938E02
3.406,1.229 3.063,0.75 3.063,0.75 2.917,0.75 true 4.865,1.24 5.188,0.719 5.188,0.719 5.344,0.719 true 1.531,3.99 3.896,4.323 2.365,0.333 10 false Multi-leaf Type Linear Control Valve 1.521,4.313 2.99,4.74 1.469,0.427 10 false Conventional Valve 5.708,2.823 6.813,3.26 1.104,0.438 10 false Piston Speed 0.281,0.167 2.958,0.625 2.677,0.458 12 false Damping Force Characteristics: 2.125,0.656 2.875,0.958 0.75,0.302 10 false Low Speed 5.406,0.635 7.031,1 1.625,0.365 10 false Medium and High Speed 0.646,1.896 2.698,2.375 2.052,0.479 10 false Extension Side Damping Force 0.417,3.125 2.74,3.583 2.323,0.458 10 false Compression Side Damping Force