Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › 2014.07–2017.01
NM19S0E _54 Brake _051417 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0247884 BRAKE CONTROL SYSTEM UN GENERAL/CONTROL/DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

Brake control (ABS with EBD) or brake control (ABS with EBD, brake assist, Traction Control (TRC), Vehicle Stability Control (VSC) and hill-start assist control) is provided depending on the model.


b.

A VSC OFF switch is provided.


c.

An emergency brake signal is provided. This signal is provided to indicate that strong braking is being performed by the driver.



PRECAUTION


a.

When brake control system is activated, the brake pedal could shudder, which is a normal occurrence of the system in operation and should not be considered as a malfunction.


b.

The TRC and VSC functions control brake hydraulic pressure and engine output to ensure vehicle stability. Therefore, operate the VSC OFF switch (stop the operation of the TRC and VSC functions) only when it is necessary.