OUTLINE
Audio System
The audio systems shown below are provided:
| Audio System | Audio Head Unit | Speaker |
|---|---|---|
| 4-speaker Sound System | Radio Less | 4 Speakers |
| 6-speaker Sound System | 6 Speakers | |
| Display Audio System | Radio and Display Receiver Assembly | 6 Speakers |
| Navigation System | Navigation Receiver Assembly | 6 Speakers |
Audio Head Unit
A Thin Film Transistor Liquid Crystal Display (TFT LCD) is used for the multi-display of the radio and display receiver assembly*1 or navigation receiver assembly*2. The multi-display shows the audio screen, Bluetooth hands-free screen, vehicle information screen, etc. and can be operated using touch operation, flick operation*3 or drag operation*3.
*1: Models with display audio system
*2: Models with navigation system
*3: Flick operation or drag operation may not be performed on all screens.
| *a | Flick Operation | *b | Drag Operation |
| *c | The illustrations shown are examples only.
The illustrations may differ from the actual audio head unit. |
- | - |
The audio source can be switched on the audio source selection screen. The arrangement of the audio sources displayed on the audio source screen can be changed according to the frequency of use.
| *a | The illustrations shown are examples only.
The illustrations may differ from the actual audio head unit. |
- | - |
Discs containing MPEG audio layer-3 (MP3) files, Windows Media Audio (WMA) files and Advanced Audio Coding (AAC) files* can be played.
*: Models with display audio system or navigation system
Discs with the marks shown below can be played:
TOYOTA Link Service
This service makes it possible to operate specified applications on the navigation system by using Bluetooth to connect the navigation system to a cellular phone with the TOYOTA Link application installed.
USB/AUX Port
An AUX port is provided that enables the use of portable audio devices.
A USB port is provided that enables the use of a USB memory device, portable audio player (USB type), iPhone, iPod, iPod classic, iPod nano or iPod touch.
| *1 | No. 1 Stereo Jack Adapter Assembly | *2 | USB Port |
| *3 | AUX Port | *4 | Portable Audio Device |
| *5 | iPod/iPhone | *6 | USB Memory Device |
iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
The following iPod, iPod nano, iPod classic, iPod touch and iPhone devices can be used with this system.
Made for
iPod touch (5th generation)
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod nano (7th generation)
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPhone 5
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
Depending on differences between models or software versions etc., some models might be incompatible with this audio system.
USB memory devices that meet the following specifications are supported:
| USB Communication Formats | ·
USB 2.0, Full Speed (12 Mbps) ·
USB 2.0, High Speed (480 Mbps) |
| File System | FAT 16/32 |
| Correspondence Class | Mass Storage Class |
| File Formats | MP3, WMA, AAC |
Bluetooth Audio System
The Bluetooth audio system enables users to enjoy music played on a portable audio player from the vehicle speakers via wireless communication.
The Bluetooth specifications and profiles required for operation are as follows:
| Specification/Profile | Version | ||
|---|---|---|---|
| Requirements | Recommendations | ||
| Bluetooth Specification | Version 2.0 | Version 3.0 + EDR | |
| Profile | Advanced Audio Distribution Profile (A2DP) | Version 1.0 | Version 1.2 |
| Audio/Video Remote Control Profile (AVRCP) | Version 1.0 | Version 1.4 | |
The connection history with Bluetooth devices that is stored in memory of the audio head unit can be checked using the Global TechStream (GTS).
Bluetooth Hands-free System
The Bluetooth hands-free system allows the user to make or receive a call without taking their hands off the steering wheel when the system is linked with a Bluetooth-compatible cellular phone.
The Bluetooth specifications and profiles required for operation are as follows:
| Specification/Profile | Version | ||
|---|---|---|---|
| Requirements | Recommendations | ||
| Bluetooth Specification | Version 2.0 | Version 3.0 + EDR | |
| Profile | Hands-free Profile (HFP) | Version 1.0 | Version 1.6 |
| Object Push Profile (OPP) | Version 1.1 | Version 1.2 | |
| Phone Book Access Profile (PBAP) | Version 1.0 | Version 1.1 | |
| Message Access Profile (MAP) | - | Version 1.0 | |
| Serial Port Profile (SPP)* | - | Version 1.1 | |
*: Models with navigation system
The operation of the interrupt call function of the Bluetooth hands-free system may vary with the Bluetooth phone or the telephone company that is used.
|
"Bluetooth" is a trademark owned by Bluetooth SIG, Inc. |
Some profiles described above may not be supported by the system depending on the audio head unit equipped.
If the specification of the connected Bluetooth phone is lower than the recommended specification or does not support the functions required, the available functions may be limited.
Registration and connection of a Bluetooth phone is not available when only Object Push Profile (OPP), Phone Book Access Profile (PBAP) and Message Access Profile (MAP) are supported.
When a Bluetooth phone is connected to the audio head unit, e-mails and Short Message Service (SMS) messages received on the phone can be displayed or read out. In addition, it is possible to reply to the received e-mail and Short Message Service (SMS) messages. (Messages may not be displayed depending on the message service or profile that the connected Bluetooth phone supports.)
Status Display
The user can confirm the signal strength and remaining battery level of the connected Bluetooth phone by using the status icons displayed on the screen. The status icons are displayed in any mode.
| *a | The illustrations shown are examples only.
The illustrations may differ from the actual audio head unit. |
- | - |
| Item | Outline | |
|---|---|---|
| (1) | Bluetooth connection status | Displays the Bluetooth connection status between the audio head unit and cellular phone. |
| (2) | Cellular phone signal strength* | Displays the signal strength of the cellular phone connected by Bluetooth. |
| (3) | Cellular phone battery level* | Displays the battery level of the cellular phone connected by Bluetooth. |
*: May not be displayed depending on the Bluetooth specifications and profiles of the cellular phone.
Automatic Sound Levelizer (ASL)
The Automatic Sound Levelizer (ASL) function automatically adjusts the audio system volume level in order to compensate for increased vehicle noise (vehicle noise tends to increase as vehicle speed increases).
Vehicle speed signals are received from the combination meter assembly and used for ASL control.
Steering Pad Switch Assembly
Switches that the driver often uses are provided on the steering wheel for convenience.
SPECIFICATION
Audio Head Unit
| Audio Head Unit | Design | Specification |
|---|---|---|
| Radio and Display Receiver Assembly |
|
·
6.1-inch Thin Film Transistor (TFT) ·
AM/FM Tuner ·
Automatic Sound Levelizer (ASL) ·
CD Player ·
CD-TEXT Display Function ·
MP3, WMA and AAC Playback Function ·
Bluetooth Audio System ·
Bluetooth Hands-free System ·
Stereo Jack Adapter (USB, AUX Port) ·
iPod/iPhone Interface ·
USB Memory Interface ·
6-speaker System ·
Unit Manufacturer: Fujitsu Ten |
| Navigation Receiver Assembly |
|
·
6.1-inch Thin Film Transistor (TFT) ·
AM/FM Tuner ·
Data System Traffic Message Channel (RDS-TMC) Tuner ·
Automatic Sound Levelizer (ASL) ·
CD Player ·
CD-TEXT Display Function ·
MP3, WMA and AAC Playback Function ·
Bluetooth Audio System ·
Bluetooth Hands-free System ·
Stereo Jack Adapter (USB, AUX Port) ·
iPod/iPhone Interface ·
USB Memory Interface ·
6-speaker System ·
Unit Manufacturer: Fujitsu Ten ·
microSD Card (Disc Player Disc): Fujitsu Ten |
4-speaker System
| Location | Speaker Type | Quantity | Size | Impedance | Rated Input Power | |
|---|---|---|---|---|---|---|
| *1 | No. 1 Front Speaker Assembly | Full Range | 2 | 160 mm (6.3 in.) | 4 Ω | 20 W |
| *2 | No. 1 Rear Speaker Assembly | Full Range | 2 | 160 mm (6.3 in.) | 4 Ω | 20 W |
6-speaker System
| Location | Speaker Type | Quantity | Size | Impedance | Rated Input Power | |
|---|---|---|---|---|---|---|
| *1 | No. 2 Front Speaker Assembly | Tweeter | 2 | 25 mm (1.0 in.) | 4 Ω | 20 W |
| *2 | No. 1 Front Speaker Assembly | Full Range | 2 | 160 mm (6.3 in.) | 4 Ω | 20 W |
| *3 | No. 1 Rear Speaker Assembly | Full Range | 2 | 160 mm (6.3 in.) | 4 Ω | 20 W |
MAIN FEATURES
TOYOTA Link Service
The TOYOTA Link service makes it possible to operate specified applications on the multi-display by using Bluetooth to connect the display audio system or navigation system to a cellular phone with the TOYOTA Link application installed.
The TOYOTA Link service enables communication between the display audio system or navigation system, application server and content provider utilizing the TOYOTA Link application installed on a cellular phone.
| *A | Models with Display Audio System | *B | Models with Navigation System |
| *1 | Radio and Display Receiver Assembly | *2 | Navigation Receiver Assembly |
| *3 | Cellular Phone | - | - |
| *a | Connection via Bluetooth | *b | Content Providers |
| *c | Timely update of "Apps" can be done. | - | - |
PRECAUTION
Ignition Switch Expressions
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) | Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |