Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM › 2011.08–2017.01
NM19S0E _57 Power Source / Network _051429 NETWORKING _0247898 CAN COMMUNICATION SYSTEM UN GENERAL/CONTROL/DETAILS F

NETWORKING  CAN COMMUNICATION SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The Controller Area Network (CAN) is a serial data communication network for real time application. It is a multiplex communication network to be equipped in a vehicle, and has communication speeds of 500 kbps (HS-CAN), and the ability to detect malfunctions.


b.

The HS-CAN consists of the V bus.


c.

The CAN has 2 terminating resistors which are necessary for accurate judgment of communication on the main bus.


d.

The terminating resistors for the V bus are located in the ECM and the combination meter assembly.