Home › Engine / Hybrid System › 1NZ-FE ENGINE MECHANICAL › ENGINE UNIT › from 2016.09
NM19S0E _51 Engine / Hybrid System _051394 1NZ-FE ENGINE MECHANICAL _0247859 ENGINE UNIT UN GENERAL/CONTROL/DETAILS F

1NZ-FE ENGINE MECHANICAL  ENGINE UNIT  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The 1NZ-FE engine is a 1.5-liter, 16-valve DOHC, in-line 4-cylinder gasoline engine.


b.

The Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System (DIS) and Electronic Throttle Control System-intelligent (ETCS-i) are used on this engine in order to realize high performance, quietness, fuel economy and clean emission.

W131076



SPECIFICATION


Engine Type 1NZ-FE
No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with VVT-i)
Combustion Chamber Pentroof Type
Flow of Intake and Exhaust Gasses Cross-Flow
Fuel System SFI
Ignition System DIS
Displacement 1497 cm3 (91.3 cu. in.)
Bore x Stroke 75.0 mm x 84.7 mm (2.95 in. x 3.33 in.)
Compression Ratio 10.5 : 1
Max. Output EEC 80 kW @ 6000 rpm
Max. Torque EEC 141 N*m @ 4400 rpm
Valve Timing Intake Open 33°BTDC to 7°ATDC
Closed 12°ABDC to 52°ABDC
Exhaust Open 42°BBDC
Closed 2°ATDC
Firing Order 1 - 3 - 4 - 2
Fuel Unleaded Gasoline
Research Octane Number (RON) 91 or higher
Oil Grade API grade SL "Energy-Conserving", SM "Energy-Conserving" or ILSAC multigrade engine oil
Emission Regulation EURO 5
Engine Service Mass* (Reference) M/T 89.6 kg (197.5 lb)
A/T 79.6 kg (175.5 lb)

HINT:

*: Weight shows the figure with oil and water fully filled.


W131074E01
0.198,0.198 1.76,0.417 1.563,0.219 12 false Performance Curve : 1.583,0.625 2.021,0.802 0.438,0.177 10 false (N*m) 1.698,0.948 1.979,1.104 0.281,0.156 10 false 150 1.708,1.125 1.99,1.281 0.281,0.156 10 false 140 1.708,1.302 1.99,1.458 0.281,0.156 10 false 130 1.708,1.49 1.99,1.646 0.281,0.156 10 false 120 1.708,1.677 1.99,1.833 0.281,0.156 10 false 110 1.708,1.844 1.99,2 0.281,0.156 10 false 100 1.792,2.021 1.99,2.188 0.198,0.167 10 false 90 0.99,1.49 1.448,1.677 0.458,0.188 10 false Torque 5.208,0.385 5.448,0.542 0.24,0.156 10 false 80 5.219,0.74 5.458,0.896 0.24,0.156 10 false 70 5.208,1.115 5.448,1.271 0.24,0.156 10 false 60 5.208,1.479 5.458,1.635 0.25,0.156 10 false 50 5.219,1.844 5.438,2.01 0.219,0.167 10 false 40 5.219,2.198 5.438,2.365 0.219,0.167 10 false 30 5.208,2.573 5.427,2.74 0.219,0.167 10 false 20 5.208,2.948 5.427,3.115 0.219,0.167 10 false 10 5.219,3.292 5.438,3.458 0.219,0.167 10 false 0 5.646,1.823 6.167,2.01 0.521,0.188 10 false Output 2.938,4.292 4.198,4.5 1.26,0.208 10 false Engine Speed (rpm) 2.344,4.021 2.677,4.188 0.333,0.167 10 false 1000 2.729,4.021 3.063,4.188 0.333,0.167 10 false 2000 3.083,4.021 3.417,4.188 0.333,0.167 10 false 3000 3.448,4.021 3.781,4.188 0.333,0.167 10 false 4000 3.813,4.021 4.146,4.188 0.333,0.167 10 false 5000 4.177,4.021 4.51,4.188 0.333,0.167 10 false 6000 4.552,4.021 4.885,4.188 0.333,0.167 10 false 7000 5.177,0.052 5.531,0.229 0.354,0.177 10 false (kW)


MAIN FEATURES


a.

The 1NZ-FE engine has achieved the following performance through the use of the items listed below.

i.

High performance and fuel economy


ii.

Low noise and vibration


iii.

Lightweight and compact design


iv.

Good serviceability


v.

Clean emission and fuel economy

Section Item (1) (2) (3) (4) (5)
Engine Proper An aluminum cylinder block sub-assembly is used. - - ○ - -
An offset crankshaft is used. ○ ○ - - ○
A taper squish shape is used for the top of the pistons. ○ - - - ○
Valve Mechanism A chain sub-assembly and no. 1 chain tensioner assembly are used. ○ - ○ ○ -
The Variable Valve Timing-intelligent (VVT-i) system is used. ○ - - - ○
Intake and Exhaust System A plastic intake manifold is used. - - ○ - -
A linkless type throttle body is used. - - ○ ○ -
A stainless steel exhaust manifold is used. - - ○ - -
2 Three-Way Catalytic converters (TWCs) are used. - - - - ○
A rearward exhaust layout is used. - - - - ○
Fuel System 12-hole type fuel injector assemblies are used. ○ - - - -
A fuel returnless system is used. - - ○ ○ ○
Quick connectors are used to connect the fuel hoses and fuel pipes. - - - ○ -
Ignition System A Direct Ignition System (DIS) is used. ○ - - ○ ○
Engine Control System The Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
The non-contact sensor is used in the throttle position sensor and accelerator pedal position sensor. ○ - - - -