Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › from 2017.01
NM19S0E _54 Brake _051417 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0247884 BRAKE CONTROL SYSTEM UN GENERAL/CONTROL/DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The following brake control functions are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), Brake Assist, Traction Control (TRC), Vehicle Stability Control (VSC) and Hill-start Assist Control.


b.

A VSC OFF switch is provided.


c.

An emergency brake signal is provided. This signal is provided to indicate that strong braking is being performed by the driver.



PRECAUTION


a.

When the brake control system is activated, the brake pedal could shudder, which is a normal occurrence of the system in operation and should not be considered as a malfunction.


b.

The TRC and VSC functions control brake hydraulic pressure and engine output to enhance vehicle stability. Therefore, operate the VSC OFF switch (stop the operation of the TRC and VSC functions) only when it is necessary.