Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE › 2017.01–2018.06
NM19S0E _59 Vehicle Exterior _051442 EXTERIOR PANELS / TRIM _0247913 BODY STRUCTURE UN GENERAL/CONTROL/DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  GENERAL/CONTROL/DETAILS  DETAILS  


FUNCTION


a.

Impact Absorbing Structure for Frontal Collision

i.

A structure that ensures collision energy absorption efficiency, dissipates impact, and minimizes cabin deformation during a frontal collision has been achieved.


ii.

Impact energy during a frontal collision will first be dispersed into the left and right front side members by the front bumper reinforcement. Then, it will be dispersed again into the rocker panel and front under floor.


iii.

Impact energy received by the upper member will be dispersed into the front door beltline reinforcements and front body pillar reinforcements.

Y111945E03
2.76,3.135 2.76,3.708 true 4.448,2.24 4.448,3.74 true 1.979,1.302 1.979,1.875 true 2.885,0.552 2.885,1.125 true 1.26,2.813 0.719,2.813 true 3.125,5.198 2.594,5.198 true 2.688,3.74 2.927,3.948 0.24,0.208 10 false *2 4.375,3.771 4.615,3.979 0.24,0.208 10 false *4 1.917,1.115 2.156,1.323 0.24,0.208 10 false *3 2.813,0.365 3.052,0.573 0.24,0.208 10 false *5 0.542,2.719 0.781,2.927 0.24,0.208 10 false *1 2.385,5.094 2.625,5.302 0.24,0.208 10 false *2

Text in Illustration
*1 Front Bumper Reinforcement *2 Front Side Member
*3 Upper Member *4 Front Door Beltline Reinforcement
*5 Front Body Pillar Reinforcement - -
V100135

Path of Collision Energy
V100136

Frontal Collision



b.

Impact Absorbing Structure for Side Collision

i.

A structure that ensures collision energy absorption efficiency, dissipates impact, and minimizes cabin deformation during a side collision has been achieved.


ii.

Ultra high strength steel sheet is used for the rocker outer reinforcement and center body pillar upper hinge reinforcement, and high strength steel sheet is used for the center body pillar outer reinforcement and rail outer reinforcement, to ensure high strength.


iii.

By providing bulkheads inside the rockers and thus controlling rocker bending, cabin deformation suppression has been aimed for.


iv.

Optimal placement of the door side impact protection beams enables a construction that efficiently transmits load.

Y167424E03
2.094,6.063 2.094,6.427 true 3.146,6.448 2.792,6.448 true 5.24,4.604 5.24,4.948 true 3.656,2.75 3.656,3.438 true 5.271,2.542 5.271,3.438 true 3.583,4.771 3.583,4.948 true 2.802,4.854 2.802,5.021 true 6.292,6.323 5.76,6.323 true 2.021,5.865 2.26,6.073 0.24,0.208 10 false *2 0.74,5.802 0.979,6.01 0.24,0.208 10 false *a 3.917,5.76 4.167,5.969 0.25,0.208 10 false *b 3.177,6.385 3.417,6.594 0.24,0.208 10 false *3 5.177,4.969 5.417,5.177 0.24,0.208 10 false *4 3.594,3.448 3.833,3.656 0.24,0.208 10 false *5 5.188,3.469 5.427,3.677 0.24,0.208 10 false *6 3.531,4.99 3.771,5.198 0.24,0.208 10 false *4 2.729,5.083 2.969,5.292 0.24,0.208 10 false *4 6.344,6.25 6.583,6.458 0.24,0.208 10 false *1 4.208,1.469 4.354,1.667 0.146,0.198 10 false A 4.208,1.469 4.354,1.667 0.146,0.198 10 true A 4.823,1.354 4.969,1.552 0.146,0.198 10 false A 3.292,4.344 3.438,4.542 0.146,0.198 10 false B 3.292,4.906 3.438,5.104 0.146,0.198 10 false B

Text in Illustration
*1 Rocker Outer Reinforcement *2 Center Body Pillar Upper Hinge Reinforcement
*3 Center Body Pillar Outer Reinforcement *4 Bulkhead
*5 Front Door Side Impact Protection Beam *6 Rear Door Side Impact Protection Beam
*a A-A Cross Section *b B-B Cross Section
V100135

Path of Collision Energy
V100136

Side Collision



c.

Lessening Pedestrian Injury

i.

A front bumper energy absorber and a front bumper energy absorber sub-assembly are provided in front of the front bumper reinforcement and below the lower radiator support. This structure helps lessen the impact applied to the legs of the pedestrians.

Y211729C01
1.313,3.135 1.531,3.573 1.531,3.573 1.698,3.573 true 0.25,1.25 0.417,1.25 0.417,1.25 0.583,2.417 true 4.25,0.583 4.417,0.583 4.417,0.583 4.938,1.208 true 6,0.25 5.833,0.25 5.833,0.25 5.552,0.917 true 4.667,3.5 4.833,3.5 4.833,3.5 5.188,2.885 true 4.25,3.25 4.417,3.25 4.417,3.25 4.729,2.865 true 6.354,2.781 6.583,2.417 6.583,2.417 6.75,2.417 true 0.073,1.156 0.271,1.344 0.198,0.188 10 false *1 1.76,3.469 2.073,3.625 0.313,0.156 10 false *2 6.063,0.146 6.375,0.302 0.313,0.156 10 false *3 4.042,3.156 4.354,3.313 0.313,0.156 10 false *4 6.823,2.313 7.135,2.469 0.313,0.156 10 false *5 0.792,2.177 1,2.365 0.208,0.188 10 true A 5.604,3.427 5.917,3.583 0.313,0.156 10 false *a 0.802,3.146 1,3.323 0.198,0.177 10 false A 4.052,0.49 4.365,0.646 0.313,0.156 10 false *1 4.458,3.396 4.771,3.552 0.313,0.156 10 false *2
*1 Front Bumper Energy Absorber *2 Front Bumper Energy Absorber Sub-assembly
*3 Front Bumper Reinforcement *4 Front Bumper Cover
*5 Lower Radiator Support - -
*a A-A Cross Section - -



ii.

A pantograph construction, which absorbs the impact it receives while collapsing, is used in the hood reinforcement. During a collision with a pedestrian, a deformable space for the pedestrian's head to strike is provided, which helps to reduce the predicted impact to the pedestrian's head.

Y152318E03
2.448,0.458 2.448,0.979 true 3.823,0.771 3.823,1.51 true 4.208,1.854 4.208,2.135 true 4.073,0.771 4.073,1.24 true 5.417,0.396 5.417,0.75 true 5.667,0.406 5.667,0.781 true 5,0.375 5,0.99 true 1.667,1.771 1.667,2.24 true 6.167,1.146 6.167,1.688 true 4.125,1.667 4.021,1.771 4.021,1.771 4.021,2.094 true 5.042,1.375 4.938,1.479 4.938,1.479 4.938,2.125 true 4.667,1.521 4.563,1.625 4.563,1.625 4.563,2.115 true 5.135,1.167 5.24,1.271 5.24,1.271 5.24,2.156 true 3.167,2.354 3.646,2.354 false 2.385,0.26 2.625,0.469 0.24,0.208 10 false *2 3.74,0.573 3.979,0.781 0.24,0.208 10 false *1 4,0.573 4.24,0.781 0.24,0.208 10 false *1 5.344,0.188 5.583,0.396 0.24,0.208 10 false *3 5.604,0.229 5.844,0.438 0.24,0.208 10 false *3 4.917,0.167 5.156,0.375 0.24,0.208 10 false *2 5.177,2.167 5.417,2.375 0.24,0.208 10 false *2 4.146,2.135 4.385,2.344 0.24,0.208 10 false *4 3.969,2.115 4.208,2.323 0.24,0.208 10 false *4 1.594,2.25 1.833,2.458 0.24,0.208 10 false *1 6.083,1.708 6.323,1.917 0.24,0.208 10 false *5 3.167,0.094 3.406,0.302 0.24,0.208 10 false *a 4.479,2.125 4.719,2.333 0.24,0.208 10 false *c 4.854,2.073 5.094,2.281 0.24,0.208 10 false *c 3.719,2.26 3.958,2.469 0.24,0.208 10 false : *b 1.26,1.948 1.406,2.146 0.146,0.198 10 false A 1.813,0.552 1.958,0.75 0.146,0.198 10 false A

Text in Illustration
*1 Hood Reinforcement *2 Hood Inner Panel
*3 Hood Sub-assembly *4 Hood Striker
*5 Engine - -
*a A-A Cross Section *b Before Collision
*c Space - -
V100135

Impact - -


iii.

An impact absorbing bracket (front apron to cowl side member plate) is used for the mounting portion of the front fender panel to absorb impact energy to the head of the pedestrian in a collision, thus helps dampening the impact to the head.

Y111951E01
2.949,1.766 2.949,2.503 false 2.883,1.585 3.117,1.792 0.235,0.208 10 *2 3.589,0.984 3.589,1.718 false 3.52,0.803 3.754,1.010 0.235,0.208 10 *1

Text in Illustration
*1 Front Fender Panel (Front Fender Sub-assembly) *2 Impact Absorbing Bracket (Front Apron to Cowl Side Member Plate)


iv.

The cowl uses an open section structure that collapses easily in an impact from the top, thus helps reducing the impact to and head injuries sustained by a pedestrian in an accident.


v.

A certain amount of depth has been provided internally under the location where the windshield wiper is mounted to allow the windshield wiper to be pushed downward if a pedestrian's head collides with the area, thus helps reducing the impact to their head during a collision.

Y211795C01
2.969,2.917 2.667,2.583 2.667,2.583 2.5,2.583 true 2.26,3.094 2.01,2.844 2.01,2.844 1.844,2.844 true 1.021,3.417 0.833,3.177 0.833,3.177 0.667,3.177 true 4.333,3.25 4.146,3.01 4.146,3.01 3.979,3.01 true 5.125,3.052 5.219,2.75 5.219,2.75 5.385,2.75 true 5.833,2.865 6,2.583 6,2.583 6.167,2.583 true 4,1.104 4.156,1.302 0.156,0.198 10 false A 3.698,1.51 3.854,1.708 0.156,0.198 10 false A 3.156,1.354 3.313,1.552 0.156,0.198 10 false B 3.458,0.948 3.615,1.146 0.156,0.198 10 false B 0.302,2.354 0.531,2.552 0.229,0.198 10 false *a 3.781,2.333 4.01,2.531 0.229,0.198 10 false *b 2.281,2.448 2.51,2.646 0.229,0.198 10 false *1 1.656,2.74 1.885,2.938 0.229,0.198 10 false *1 0.448,3.052 0.677,3.25 0.229,0.198 10 false *2 0.927,4.344 1.406,4.594 0.479,0.25 10 false : *C 3.781,2.917 4.01,3.115 0.229,0.198 10 false *2 5.479,2.656 5.708,2.854 0.229,0.198 10 false *3 6.229,2.49 6.458,2.688 0.229,0.198 10 false *1 5.302,3.823 5.531,4.021 0.229,0.198 10 false *d
*1 Windshield *2 Hood Sub-assembly
*3 Windshield Wiper - -
*a A-A Cross Section *b B-B Cross Section
*c Before Collision *d Space
V100135

Impact - -



vi.

In order to help reduce collision impact for pedestrians, a space has been provided under the left and right hood hinge arms so that they can move if a pedestrian's head collides with the hood.

Y111953E04
4.875,1.396 5.188,0.719 5.188,0.719 5.583,0.719 true 5.146,1.271 5.396,0.729 true 4.156,1.771 4.604,2.177 4.604,2.177 5.25,2.177 true 4.25,1.458 5.031,2.177 true 4.875,4.01 4.396,3.667 4.396,3.667 4.219,3.667 true 5.021,3.302 5.208,3.094 5.208,3.094 5.573,3.094 true 5.021,3.49 5.365,3.094 true 2.26,3.521 2.49,3.281 2.49,3.281 2.781,3.281 true 2.281,3.677 2.625,3.292 true 2.125,3.802 1.938,3.271 1.938,3.271 1.781,3.271 true 0.531,3.042 0.771,3.26 0.24,0.219 10 false *a 1.031,5.531 1.271,5.75 0.24,0.219 10 false : *c 3.49,3.042 3.729,3.26 0.24,0.219 10 false *b 3.208,0.208 3.448,0.427 0.24,0.219 10 false A 2.51,2.552 2.75,2.771 0.24,0.219 10 false A 3.01,2.521 3.25,2.74 0.24,0.219 10 false B 3.677,0.167 3.917,0.385 0.24,0.219 10 false B 5.625,0.625 5.865,0.854 0.24,0.229 10 false *1 1.594,3.188 1.781,3.406 0.188,0.219 10 false *d 5.615,3.01 5.854,3.24 0.24,0.229 10 false *2 4.042,3.563 4.25,3.781 0.208,0.219 10 false *d 5.271,2.073 5.51,2.302 0.24,0.229 10 false *2 2.833,3.198 3.073,3.427 0.24,0.229 10 false *2

Text in Illustration
*1 Hood Sub-assembly *2 Hood Hinge Assembly
*a A-A Cross Section *b B-B Cross Section
*c Before Collision *d Space
V100135

Impact - -



d.

Aerodynamics

i.

Spats are fitted at the front of the rear tires to direct the airflow, and this reduces air turbulence into the wheel house, ensuring straight driving stability at high speeds.


ii.

The outer rear view mirror shape has been optimized to increase the aerodynamics.


iii.

A rear spoiler sub-assembly is provided, giving a rectifying effect and allowing superior aerodynamic performance.

Y167635E05
6.104,0.917 6.406,0.208 6.406,0.208 6.594,0.208 true 2.125,1.188 2.646,0.469 2.646,0.469 2.74,0.469 true 4.51,3.177 4.906,2.292 4.906,2.292 5,2.292 true 4.531,4.583 5.01,5.417 5.01,5.417 5.115,5.417 true 3.26,5.271 3.354,5.271 3.354,5.271 4.115,4.396 true 1.188,5.063 1.292,5.063 1.292,5.063 2.042,4.177 true 1.219,4.26 1.323,4.26 1.323,4.26 1.969,3.927 true 4.104,3.281 3.75,1.917 3.75,1.917 3.656,1.917 true 1.99,2.927 1.573,2.094 1.573,2.094 1.469,2.094 true 1.948,3.25 1.344,2.719 1.344,2.719 1.25,2.719 true 2.417,5.292 2.521,5.292 2.521,5.292 3.656,3.958 true 2.781,0.385 3.25,0.667 0.469,0.281 10 false *1 6.625,0.135 7.094,0.396 0.469,0.26 10 false *2(*A) 5.063,2.198 5.521,2.458 0.458,0.26 10 false *3 5.188,5.344 5.646,5.604 0.458,0.26 10 false *3 3.26,1.823 3.719,2.083 0.458,0.26 10 false *4(*A) 2.854,5.177 3.313,5.438 0.458,0.26 10 false *4(*A) 2.219,5.219 2.438,5.479 0.219,0.26 10 false *7 1.073,2.01 1.531,2.271 0.458,0.26 10 false *5(*A) 0.781,4.969 1.24,5.229 0.458,0.26 10 false *5(*A) 1.063,2.646 1.521,2.906 0.458,0.26 10 false *6 1.042,4.156 1.5,4.417 0.458,0.26 10 false *6

Text in Illustration
*A for Sport Package Models - -
*1 Outer Rear View Mirror Assembly *2 Rear Spoiler Sub-assembly
*3 Rear Spat (Rear Wheel Opening Extension Pad) *4 Center Spat (Rocker Panel Moulding Protector)
*5 Front Spat (Front Wheel Opening Extension Pad) *6 Fin
*7 Front Floor Brace Center - -


iv.

A grooved structure has been adopted for the front fender liner. This guides airflow inside the wheel housing along the tire, thus smoothing the airflow inside the wheel housing and further enhancing maneuvering stability.

Y211769C01
1.271,1.969 0.583,0.917 0.583,0.917 0.417,0.917 true 4.646,1.594 4.75,0.75 4.75,0.75 4.917,0.75 true 4.875,1.625 5.083,1 5.083,1 5.25,1 true 5.813,1.188 6,0.75 6,0.75 6.167,0.75 true 4.563,3.198 4.75,2.75 4.75,2.75 4.917,2.75 true 4.99,3.177 5.167,2.917 5.167,2.917 5.333,2.917 true 5.833,3.354 6.021,2.917 6.021,2.917 6.188,2.917 true 5.042,3.813 5.167,4.229 5.167,4.229 5.333,4.229 true 0.198,0.802 0.51,0.958 0.313,0.156 10 false *1 5.396,4.156 5.708,4.313 0.313,0.156 10 false *2 3.365,0.229 3.646,0.51 0.281,0.281 10 false *a 4.958,0.667 5.271,0.823 0.313,0.156 10 false *b 3.406,2.625 3.667,2.896 0.26,0.271 10 false *c 5.292,0.906 5.604,1.063 0.313,0.156 10 false *b 6.229,0.667 6.542,0.823 0.313,0.156 10 false *1 4.969,2.667 5.281,2.823 0.313,0.156 10 false *b 5.385,2.844 5.635,3.083 0.25,0.24 10 false *b 6.25,2.833 6.563,2.99 0.313,0.156 10 false *1 1.417,1.396 1.552,1.563 0.135,0.167 10 true A 4.125,1.719 4.26,1.885 0.135,0.167 10 true B 5.74,1.719 5.875,1.885 0.135,0.167 10 true B
*1 Front Fender Liner *2 Tire
*a A Site *b Fin
*c B - B Cross Section - -
V100135

Airflow - -



v.

The front fender liner and bracket ensure a space before the vehicle body, which provides efficient ventilation of the air inside the engine compartment.

Y211770C01
1.292,1.979 0.583,0.917 0.583,0.917 0.417,0.917 true 2.188,3.875 2.917,3 2.917,3 3.083,3 true 4.979,1.094 5.313,0.677 5.313,0.677 5.479,0.677 true 5.5,3.5 5.833,3.083 5.833,3.083 6,3.083 true 4.583,1 4.5,1.417 4.5,1.417 4.333,1.417 true 0.198,0.813 0.51,0.969 0.313,0.156 10 false *1 3.167,2.927 3.479,3.083 0.313,0.156 10 false *2 5.542,0.604 5.854,0.76 0.313,0.156 10 false *3 5.438,4.094 5.729,4.365 0.292,0.271 10 false *a 2.083,4.427 2.375,4.698 0.292,0.271 10 false A 1.708,2.76 1.875,2.917 0.167,0.156 10 true A 6.083,3.01 6.396,3.167 0.313,0.156 10 false *2 4.115,1.313 4.427,1.469 0.313,0.156 10 false *1
*1 Front Fender Liner *2 Front Fender Liner Bracket
*3 Body - -
*a A - A Cross Section - -
V100135

Airflow - -





CONSTRUCTION


a.

Lightweight and Highly Rigid Body

i.

High strength steel sheet and ultra high strength steel sheet are used in order to achieve excellent body rigidity and a lightweight body.

Y211720C01
0,0 0,0 false
V100145

High Strength Steel Sheet
V100144

Ultra High Strength Steel Sheet




b.

Body Shell Construction

i.

Sufficient rigidity has been ensured by using the outer cowl top panel as a framework cross member to smoothly connect the left and right front suspension towers. In this way, good driving stability has been achieved.

Y119934C02
4.323,3.063 4.104,3.063 4.104,3.063 3.958,2.375 true 4.365,3 4.677,3.156 0.313,0.156 10 false *1
*1 Outer Cowl Top Panel - -
V100135

Front - -



ii.

Spot welds have been added around the front body pillar and rear inner roof side to improve body rigidity.

Y211630C01
5.229,0.313 5.531,0.177 5.531,0.177 5.698,0.177 true 0.49,2.833 0.656,2.833 0.656,2.833 0.844,2.24 true 2.333,3.917 2.573,3.625 2.573,3.625 2.74,3.625 true 5.333,4.406 5.469,4.906 5.469,4.906 5.635,4.906 true 0.281,2.76 0.594,2.917 0.313,0.156 10 false *a 5.781,0.104 6.094,0.26 0.313,0.156 10 false *b 2.792,3.552 3.104,3.708 0.313,0.156 10 false *c 1.49,5.552 1.802,5.708 0.313,0.156 10 false *a 4.875,5.271 5.188,5.427 0.313,0.156 10 false *b 5.708,4.823 6.021,4.979 0.313,0.156 10 false *c
*a Front Body Pillar *b Rear Inner Roof Side
*c Spot welds - -



iii.

The thicknesses of the front body pillar lower gusset on the left and right sides of the instrument panel reinforcement, and of the front body pillar lower brace on the left and right sides of the dash panel have been optimized.

Y211629C01
1.115,2.698 1.281,2.698 1.281,2.698 1.5,2.208 true 2.083,0.667 1.917,0.667 1.917,0.667 1.625,1.948 true 4.469,1.281 4.24,0.313 4.24,0.313 4.073,0.313 true 4.854,1.188 5.333,1.792 5.333,1.792 5.5,1.792 true 0.917,2.625 1.229,2.781 0.313,0.156 10 false *1 2.156,0.594 2.469,0.75 0.313,0.156 10 false *2 5.563,1.719 5.875,1.875 0.313,0.156 10 false *3 3.885,0.25 4.198,0.406 0.313,0.156 10 false *1
*1 Front Body Pillar Lower Brace *2 Front Body Pillar Lower Gusset LH
*3 Front Body Pillar Lower Gusset RH - -




c.

Anti-corrosion Sheet Steel

i.

Anti-corrosion sheet steel is used as in the following illustration:

Y211721C01
0,0 0,0 false
V100145

Anti-corrosion Sheet Steel - -




d.

Wax and Anti-chipping Application

i.

Wax is applied to front end of hood sub-assembly, edge of the door lower portion and fuel filler lid hinge to improve rust-resistant performance.


ii.

To protect the paint from chipping, anti-chipping paint is applied to the rockers and the front end of the hood sub-assembly.

Y211722C01
4.865,2.625 5.177,2.781 0.313,0.156 10 false *1 4.125,4.75 4.438,4.906 0.313,0.156 10 false *2 0.219,6.448 0.531,6.604 0.313,0.156 10 false *a
*1 Fuel Filler Lid Hinge *2 Door Hinge
*a The illustrations shown are examples only. - -
V100143

Wax
V100145

Anti-chipping Paint




e.

Under Coat

i.

Acrylic resin is applied to the underside of the body, inside the wheel housing and other parts that are susceptible to stone chipping damage, thus improving the rust-resistant performance of these areas.

Y168122E02
0.719,3.688 1.135,3.948 0.417,0.26 10 false *a 4.104,3.688 4.521,3.948 0.417,0.26 10 false *b

Text in Illustration
*a Front Wheel House *b Rear Wheel House
V115380

Edge Seal
V100145

Acrylic Resin Coating Area
V100144

Acrylic Resin Coating Area (Thick Coating) - -



f.

Low Vibration and Low Noise Body

i.

A hood insulator is provided on the rear of the hood sub-assembly. This achieves excellent sound insulation performance.


ii.

An outer dash panel insulator is provided. These reduce the amount of engine noise leaking into and out of the cabin.


iii.

A front fender side panel protector is provided. This prevents road noise from entering the cabin, and achieves superior quietness.

Y168123E02
0.823,0.542 0.927,0.542 0.927,0.542 1.146,1.396 true 4.094,0.396 4.188,0.396 4.188,0.396 4.448,1.094 true 6.542,2.448 6.448,2.448 6.448,2.448 5.802,2.74 true 0.635,0.479 0.958,0.75 0.323,0.271 10 false *1 3.917,0.323 4.24,0.594 0.323,0.271 10 false *2 6.604,2.385 6.927,2.656 0.323,0.271 10 false *3

Text in Illustration
*1 Hood Insulator *2 Outer Dash Panel Insulator
*3 Front Fender Side Panel Protector - -


iv.

To reduce the amount of road noise, engine noise and droning sound that enters the cabin, the floor panel is coated with a vibration damping coat.

Y168124

Text in Illustration
V100145

Spray Type Damping Material Application Area - -


v.

A sound insulation material is used in the body frame profile, thus reducing the various noises which intrude from the outside of the vehicle to the inside of the cabin.


vi.

Rocker panel moulding is provided on the underside of the rockers, thus reducing the sound of sand and pebbles thrown up from the road.

Y150869E02
3.906,5.708 4.333,6.156 4.333,6.156 4.438,6.156 true 3.531,2.75 3.688,2.938 0.156,0.188 10 true A 3.563,3.365 3.833,3.625 0.271,0.26 10 false A 2.635,4.063 3.052,4.396 0.417,0.333 10 false *a 4.469,6.083 4.885,6.417 0.417,0.333 10 false *1

Text in Illustration
*1 Rocker Panel Moulding - -
*a A-A Cross Section - -
V100145

Polyurethane Form
V100144

Expanded Form
V100143

Polyethylene Sealer - -



g.

Parts with Low Repair Cost

i.

A crush box structure is used to reduce body deformation during minor collisions. A structure with screw connections is provided for the front bumper arm sub-assembly to enable easy removal and installation, thus achieving simpler servicing operation and repair cost reduction.

Y111966E04
1.833,2.531 1.458,3.26 1.458,3.26 1.208,3.26 true 0.615,2.458 0.365,2.458 true 3.104,3.052 3.427,3.542 3.427,3.542 3.677,3.542 true 1.031,3.167 1.229,3.365 0.198,0.198 10 false *1 3.708,3.458 3.906,3.656 0.198,0.198 10 false *2 0.177,2.375 0.375,2.573 0.198,0.198 10 false *3

Text in Illustration
*1 Front Bumper Reinforcement *2 Front Bumper Arm Sub-assembly
*3 Bolt - -