Home › General › SPECIFICATIONS › 1NZ-FE FUEL
RM19S0E _V1 General _051446 SPECIFICATIONS _0247984 1NZ-FE FUEL F

SPECIFICATIONS  1NZ-FE FUEL  SERVICE DATA  


Battery Standard voltage 11 to 14 V
Fuel pressure Standard fuel pressure 304 to 343 kPa (3.1 to 3.5 kgf/cm2, 44.1 to 49.7 psi)
at fuel pressure remains for 5 minutes after engine has stopped 147 kPa (1.5 kgf/cm2, 21 psi) or more
Fuel injector Standard resistance
Injection volume
Difference between each injector
Fuel drop
11.6 to 12.4 Ω at 20°C (68°F)
47 to 58 cm3 (2.9 to 3.5 cu in.) every 15 seconds
11 cm3 (0.7 cu in.) or less
1 drop or less every 12 minutes
Fuel pump Standard resistance
1 - 2
0.2 to 3.0 Ω at 20°C (68°F)
Fuel sender gauge (Triangular float type) Standard resistance
1 - 2
1 - 2
12.0 to 18.0 Ω (Upper end)
405 to 415 Ω (Lower end)
Fuel sender gauge (Rectangular float type) Standard resistance
1 - 2
1 - 2
13.5 to 16.5 Ω (Upper end)
405.5 to 414.5 Ω (Lower end)