Home › General › SPECIFICATIONS › 1NZ-FE LUBRICATION
RM19S0E _V1 General _051446 SPECIFICATIONS _0247992 1NZ-FE LUBRICATION F

SPECIFICATIONS  1NZ-FE LUBRICATION  SERVICE DATA  


oil pressure Standard oil pressure 29 kPa (0.3 kgf/cm2, 4.3 psi) or more at idling
150 to 550 kPa (1.5 to 5.6 kgf/cm2, 22 to 80 psi) at 3,000 rpm
Oil pump rotor set Standard tip clearance 0.060 to 0.180 mm (0.0024 to 0.0071 in.)
Maximum tip clearance 0.28 mm (0.0110 in.)
Standard body clearance 0.250 to 0.325 mm (0.0098 to 0.0128 in.)
Maximum body clearance 0.425 mm (0.0167 in.)