Home › Engine / Hybrid System › 2NZ-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM19S0E _51 Engine / Hybrid System _051449 2NZ-FE ENGINE CONTROL _0248056 CAMSHAFT OIL CONTROL VALVE A

2NZ-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 11101J 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Apply a light coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly.

HINT:

Do not twist the O-ring.



b.

Apply a light coat of engine oil to the O-ring and install the camshaft timing oil control valve assembly with the bolt.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


c.

Connect the camshaft timing oil control valve assembly connector.


Hide 11212 2.INSTALL NO. 2 CYLINDER HEAD COVER

a.

Install the No. 2 cylinder head cover with the 4 nuts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)