Home › Engine / Hybrid System › 2NZ-FE ENGINE CONTROL › THROTTLE BODY
RM19S0E _51 Engine / Hybrid System _051449 2NZ-FE ENGINE CONTROL _0248057 THROTTLE BODY G

2NZ-FE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE BODY ASSEMBLY

a.
A366826E01
2.146,1.031 2.146,0.469 false 2.5,1.021 2.5,0.458 false 2.031,0.26 2.344,0.458 0.313,0.198 10 false M+ 2.365,0.26 2.677,0.458 0.313,0.198 10 false M- 0.135,0.135 0.448,0.333 0.313,0.198 10 false *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle body.

Text in Illustration
*a Component without harness connected
(Throttle Body Assembly)