Home › Engine / Hybrid System › 2NZ-FE ENGINE CONTROL › INTEGRATION RELAY
RM19S0E _51 Engine / Hybrid System _051449 2NZ-FE ENGINE CONTROL _0248068 INTEGRATION RELAY A

2NZ-FE ENGINE CONTROL  INTEGRATION RELAY  INSTALLATION  


PROCEDURE

Hide 82641 1.INSTALL NO. 1 INTEGRATION RELAY

a.

Connect the 3 connectors.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace it.



b.

Attach the integration relay to the engine room relay block.


Hide 82662A 2.INSTALL ENGINE ROOM MAIN RELAY BLOCK COVER