Home › Engine / Hybrid System › 1NZ-FE EMISSION CONTROL › PURGE VALVE › from 2015.06
RM19S0E _51 Engine / Hybrid System _051454 1NZ-FE EMISSION CONTROL _0248102 PURGE VALVE A

1NZ-FE EMISSION CONTROL  PURGE VALVE  REMOVAL  


PROCEDURE

Hide 25860 1.REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

a.
A332180

Slide the hose clip and disconnect the fuel vapor feed hose assembly from the No. 1 vacuum switching valve assembly.


b.
A332181

Disconnect the No. 2 fuel vapor feed hose from the No. 1 vacuum switching valve assembly.


c.
A332182

Disconnect the No. 1 vacuum switching valve assembly connector.


d.

Disengage the clamp to separate the wire harness from the No. 1 vacuum switching valve assembly.


e.

Pull out the No. 1 vacuum switching valve assembly from the No. 1 air cleaner hose to remove it.