12204
1.INSPECT VENTILATION VALVE SUB-ASSEMBLY
Install a clean hose to the ventilation valve sub-assembly.
Check the ventilation valve sub-assembly operation.
Blow air into the cylinder head cover side, and check that air passes through easily.
| *1 | Clean Hose |
|
Cylinder Head Cover Side |
|
Air |
Do not suck air through the valve.
Petroleum substances inside the valve are hazardous to your health.
If the result is not as specified, replace the ventilation valve sub-assembly.
Blow air into the intake air manifold side, and check that air passes through with difficulty.
| *1 | Clean Hose |
|
Intake Manifold Side |
|
Air |
Do not suck air through the valve.
Petroleum substances inside the valve are hazardous to your health.
If the result is not as specified, replace the ventilation valve sub-assembly.
Remove the clean hose from the ventilation valve sub-assembly.