1.INSPECT COOLING FAN MOTOR
Check that the motor operates smoothly when battery voltage is applied to the cooling fan motor connector.
Connect the 400 A probe of an ammeter to terminal 2(+) of the cooling fan motor.
Measure the current while the motor is operating.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 (-) - 2 (+) | 20°C (68°F) | 7.4 to 10.9 A |
| *a | Component without harness connected
(Cooling Fan Motor) |
If the result is not as specified, replace the cooling fan motor.