Home › Engine / Hybrid System › 1NZ-FE LUBRICATION › OIL PRESSURE SWITCH
RM19S0E _51 Engine / Hybrid System _051460 1NZ-FE LUBRICATION _0248139 OIL PRESSURE SWITCH A

1NZ-FE LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.
A085603E35
1.125,0.313 1.302,0.469 0.177,0.156 10 false *1

Apply adhesive to 2 or 3 threads of the oil pressure switch.

Text in Illustration
*1 Adhesive

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



b.
A247179E01
2.256,0.628 2.419,0.786 0.163,0.158 10 *1 1.908,0.938 2.252,0.746 false

Using a 24 mm deep socket wrench, install the oil pressure switch assembly.

Text in Illustration
*1 24 mm deep socket wrench

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine for at least 1 hour after installation.



c.

Connect the oil pressure switch connector.


Hide 2.INSPECT FOR ENGINE OIL LEAK