CHECK ECM
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A74-20 (BATT) - B84-104 (E1) | Y - W-B | Power source circuit | Always | 11 to 14 V |
| A74-28 (IGSW) - B84-104 (E1) | R - W-B | IG power source circuit | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| A74-36 (STP) - B84-104 (E1) | LG - W-B | Stop light switch signal circuit | Brake pedal depressed | 11 to 14 V |
| Brake pedal released | Below 1 V | |||
| A74-35 (ST1-) - B84-104 (E1) | Y - W-B | Stop light switch signal circuit | Ignition switch ON, brake pedal released | 11 to 14 V |
| Ignition switch ON, brake pedal depressed | Below 1 V | |||
| A74-40 (CCS) - B84-104 (E1) | G - W-B | Cruise control main switch circuit | Cruise control main switch on | Below 2.5 Ω |
| Cruise control main switch off | 1 MΩ or higher | |||
| +RES switch held on | 235 to 245 Ω | |||
| -SET switch held on | 617 to 643 Ω | |||
| CANCEL switch held on | 1509 to 1571 Ω | |||
| B84-56 (D) - B84-104 (E1)*1 | L - W-B | Park/neutral position switch signal | Ignition switch ON, shift lever in D | 11 to 14 V |
| Ignition switch ON, shift lever not in D | Below 1 V | |||
| B84-56 (D) - B84-104 (E1)*2 | L - W-B | Clutch switch signal | Ignition switch ON, clutch pedal depressed | 11 to 14 V |
| Ignition switch ON, clutch pedal released | Below 1 V | |||
| B84-104 (E1) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
*1: for Automatic Transaxle
*2: for Manual Transaxle