Home › Drivetrain › U340E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE FLUID
RM19S0E _52 Drivetrain _051465 U340E AUTOMATIC TRANSMISSION / TRANSAXLE _0248157 AUTOMATIC TRANSAXLE FLUID G

U340E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE FLUID  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT AUTOMATIC TRANSAXLE FLUID

HINT:

Drive the vehicle until the engine and transaxle are at normal operating temperature.


Fluid temperature:

70 to 80 °C (158 to 176 °F)


D025120E21
2.073,0.01 2.292,0.313 0.219,0.302 10 false *a 1.156,0.76 1.323,1.083 0.167,0.323 10 false *b

Text in Illustration
*a OK if hot
*b Add if hot

a.

Park the vehicle on a level surface and engage the parking brake.


b.

With the engine idling and the brake pedal depressed, shift the shift lever into all positions from P to L, and then return it to P.


c.

Pull out the oil level dipstick and wipe it clean.


d.

Push it fully back into the pipe.


e.

Pull it out and check that the fluid level is within the HOT range.

If there is any leakage, repair or replace O-rings, seal packing, oil seals, plugs or other parts.