Home › Drivetrain › U340E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SPEED SENSOR
RM19S0E _52 Drivetrain _051465 U340E AUTOMATIC TRANSMISSION / TRANSAXLE _0248158 SPEED SENSOR A

U340E AUTOMATIC TRANSMISSION / TRANSAXLE  SPEED SENSOR  INSTALLATION  


PROCEDURE

Hide 89413B 1.INSTALL TRANSMISSION REVOLUTION SENSOR

a.

Coat a new O-ring with Toyota Genuine ATF WS and install it to the transmission revolution sensor.


b.

Install the transmission revolution sensor to the automatic transaxle assembly with the bolt.

Torque:
7.8 N*m (80 kgf*cm, 69 in.*lbf)


c.

Connect the transmission revolution sensor connector.


Hide 74411 2.INSTALL BATTERY CARRIER (for LHD)

a.

Install the battery carrier with the 5 bolts.

Torque:
17 N*m (173 kgf*cm, 13 ft.*lbf)


b.

Engage the 6 wire harness clamps and install the wire harness.


Hide 74431 4.INSTALL BATTERY TRAY

Hide 6.INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK