Home › Drivetrain › U340E (AUTOMATIC TRANSMISSION / TRANSAXLE) › VALVE BODY ASSEMBLY
RM19S0E _52 Drivetrain _051465 U340E AUTOMATIC TRANSMISSION / TRANSAXLE _0248160 VALVE BODY ASSEMBLY A

U340E AUTOMATIC TRANSMISSION / TRANSAXLE  VALVE BODY ASSEMBLY  REMOVAL  


PROCEDURE

Hide 51442C 1.REMOVE ENGINE UNDER COVER LH (for Plastic Type)

Hide 51405A 2.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (for Metal Type)

Hide 3.DRAIN AUTOMATIC TRANSAXLE FLUID

a.

Remove the drain plug and gasket, and drain ATF.


b.

Install a new gasket and the drain plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)


Hide 35106D 4.REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

U134425

a.

Remove the 19 bolts, automatic transaxle oil pan sub-assembly and the automatic transaxle oil pan gasket.

NOTICE:

Some fluid will remain in the automatic transaxle oil pan sub-assembly. Remove all the oil pan bolts, and carefully remove the automatic transaxle oil pan sub-assembly.



b.
U134466

Remove the 2 oil cleaner magnets from the automatic transaxle oil pan sub-assembly.


c.
AT00103

Examine the particles in the automatic transaxle oil pan sub-assembly.

i.

Collect any steel chips using the removed oil cleaner magnets.

Carefully inspect the foreign matter and particles in the automatic transaxle oil pan sub-assembly and on the oil cleaner magnets to guess at the type of wear which might be found in the automatic transaxle.

Steel (magnetic): bearing, gear and clutch plate wear

Brass (non-magnetic): bearing wear



Hide 35330 5.REMOVE VALVE BODY OIL STRAINER ASSEMBLY

C062685

a.

Remove the 3 bolts and the valve body oil strainer assembly.

NOTICE:

Perform the operation carefully as some fluid will come out from the valve body oil strainer assembly.



b.
U134876

Remove the oil strainer gasket from the valve body oil strainer assembly.


Hide 82125J 6.SEPARATE TRANSMISSION WIRE

a.
C355234

Disconnect the 5 connectors from the transmission valve body assembly.


b.

Remove the bolt and the lock plate, and separate the transmission wire.


Hide 35410 7.REMOVE TRANSMISSION VALVE BODY ASSEMBLY

a.
U134464E03
2.25,0.604 2.646,0.458 false 2.229,1.208 2.615,1.208 false 2.677,0.354 2.865,0.563 0.188,0.208 10 false *1 2.656,1.146 2.854,1.313 0.198,0.167 10 false *2

Remove the 2 bolts, manual detent spring cover and the manual detent spring.

Text in Illustration
*1 Manual Detent Spring
*2 Manual Detent Spring Cover


b.
C355235

Remove the 13 bolts and the transmission valve body assembly.

NOTICE:

Do not drop the check ball body, check ball body spring or accumulator piston.



c.
D005901E11
1.438,1.948 1.583,1.948 false 2.094,1.979 1.635,1.688 false 1.229,1.875 1.396,2.052 0.167,0.177 10 false *1 2.146,1.917 2.333,2.063 0.188,0.146 10 false *2

Remove the check ball body and the check ball body spring.

Text in Illustration
*1 Check Ball Body
*2 Check Ball Body Spring


d.
U134875

Remove the transaxle case 2nd brake gasket and the transaxle case gasket.