58910C
1.REMOVE REAR CONSOLE BOX ASSEMBLY
2.ADJUST SHIFT LEVER POSITION
Move the shift lever to N.
Slide the adjuster case cover in the direction shown by the arrow.
| *1 | Adjuster Case |
| *2 | Cover |
| *3 | Lock Piece |
Using a precision screwdriver, pull up the lock piece.
Using your fingers, gently pull the cable rod towards the rear of the vehicle to remove backlash.
| *1 | Adjuster Case |
| *2 | Lock Piece |
| *3 | Cable Rod |
| *4 | Cover |
Push in the lock piece of the adjuster case to lock it.
Slide the adjuster case cover in the direction shown by the arrow.
If the cover is not pushed over the protrusion on the lock, the cable will not lock and shift operation will not be accurate.
58910C
3.INSTALL REAR CONSOLE BOX ASSEMBLY