Home › Drivetrain › U340E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER
RM19S0E _52 Drivetrain _051465 U340E AUTOMATIC TRANSMISSION / TRANSAXLE _0248162 SHIFT LEVER A

U340E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  REMOVAL  


PROCEDURE

Hide 33504F 1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

a.

Move the shift lever to N.


b.
C244552

Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly from the shift lever assembly.


Hide 2.REMOVE REAR CONSOLE BOX ASSEMBLY

Hide 33820B 3.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C244554

Disconnect the cable end from the shift lever assembly.


b.
C241902E01
0.13,1.121 0.318,1.301 0.188,0.181 10 *a 0.527,0.564 0.714,0.744 0.188,0.181 10 *b 0.628,1.823 0.706,1.377 false 0.516,1.863 0.673,2.021 0.156,0.158 10 *1

Rotate the nut approximately 180° in the direction shown in the illustration, and while holding the nut, separate the transmission control cable assembly from the shift lever plate.

Text in Illustration
*1 Nut
*a Rotate approximately 180°
*b Pull out

NOTICE:

Rotating the nut too much will damage the internal spring, and the transmission control cable assembly will not be reusable. Do not turn the nut too far.



Hide 4.REMOVE SHIFT LEVER ASSEMBLY

a.
C266297E02
0.25,0.25 0.479,0.448 0.229,0.198 10 false *A 1.948,0.24 2.135,0.406 0.188,0.167 10 false *B

Disconnect the 2 connectors from the shift lever assembly.

Text in Illustration
*A for Integrated Type Shift Lock Control ECU
*B for Separate Type Shift Lock Control ECU


b.

Disengage the 3 clamps and separate the wire harness from the shift lever assembly.


c.
C244560

Remove the 4 bolts and the shift lever assembly.