Home › Drivetrain › U340E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER
RM19S0E _52 Drivetrain _051465 U340E AUTOMATIC TRANSMISSION / TRANSAXLE _0248162 SHIFT LEVER A

U340E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  DISASSEMBLY  


PROCEDURE

Hide 35971E 1.REMOVE UPPER POSITION INDICATOR HOUSING

C244564

a.

Disengage the 4 claws and remove the upper position indicator housing from the shift lock control unit assembly.

NOTICE:

Do not damage the upper position indicator housing.



Hide 35921 2.REMOVE CONTROL POSITION INDICATOR PLATE

C244629

a.

Disengage the claw and remove the control position indicator plate from the upper position indicator housing.


Hide 85903 3.REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY (for Separate Type Shift Lock Control ECU)

a.
C244571

Disengage the claw and pull out the shift lock control ECU sub-assembly from the shift lock control unit assembly.


b.
C235342

Disengage the 2 clamps and separate the shift lock solenoid wire from the shift lock unit cover.


c.

Disconnect the shift lock solenoid connector.


d.
C235343

Disengage the 3 claws and remove the shift lock unit cover from the shift lock control ECU sub-assembly.


Hide 35975 4.REMOVE POSITION INDICATOR SLIDE COVER

C241911

a.

Remove the position indicator slide cover from the shift lock control unit assembly.


Hide 35976 5.REMOVE NO. 2 POSITION INDICATOR SLIDE COVER

C235350

a.

Align the cutouts on the shank of the No. 2 position indicator slide cover and the position indicator slide cover, and remove the No. 2 position indicator slide cover from the position indicator slide cover.


Hide 35906 6.REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY

C244569

a.

Separate the indicator light wire socket.


b.
C244570

Disengage the 4 clamps and separate the indicator light wire sub-assembly from the shift lock control unit assembly.


c.
C236989

Using a screwdriver, lift up the terminal retainer of the transmission control switch connector to release the lock.


d.
C155838E02
2.407,0.229 2.72,0.427 0.314,0.198 10 *a

Using a thin-bladed screwdriver, pull out terminal 7 and 14 of the transmission control switch connector.

Text in Illustration
*a Component without harness connected
(Transmission Control Switch)


Hide 33550D 7.REMOVE POSITION INDICATOR LIGHT BULB

a.

Remove the position indicator light bulb from the indicator light wire sub-assembly.


Hide 33550E 8.REMOVE POSITION INDICATOR LIGHT CAP

a.

Remove the position indicator light cap from the position indicator light bulb.


Hide 35974 9.REMOVE LOWER POSITION INDICATOR HOUSING

a.
C266298

Disengage the 4 claws and remove the lower position indicator housing from the shift lock control unit assembly.