Home › Drivetrain › U441E (AUTOMATIC TRANSMISSION / TRANSAXLE) › PARK / NEUTRAL POSITION SWITCH
RM19S0E _52 Drivetrain _051466 U441E AUTOMATIC TRANSMISSION / TRANSAXLE _0248173 PARK / NEUTRAL POSITION SWITCH G

U441E AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

Apply the parking brake and turn the ignition switch ON.


b.

Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in the other positions.


c.

Check that the back-up lights illuminate when the shift lever is in R, and that they do not illuminate with the shift lever in the other positions.

If a malfunction failure is found, check the park/ neutral position switch assembly for continuity.