35301A
1.INSTALL FRONT OIL PUMP OIL SEAL
Coat a new front oil pump oil seal lip with MP grease.
Using SST and a hammer, install the front oil pump oil seal to the front oil pump body.
-0.15 to 0.15 mm (-0.00591 to 0.00591 in.)
35322
2.INSTALL FRONT OIL PUMP DRIVEN GEAR
Coat the front oil pump driven gear with Toyota Genuine ATF Type T-IV, and install it to the front oil pump body.
35321
3.INSTALL FRONT OIL PUMP DRIVE GEAR
Coat the front oil pump drive gear with Toyota Genuine ATF Type T-IV, and install it to the front oil pump body.
35370
4.INSTALL STATOR SHAFT ASSEMBLY
Align the stator shaft assembly with the bolt holes.
Install the 8 bolts.
5.INSPECT OIL PUMP ASSEMBLY
Using 2 screwdrivers, make sure that the front oil pump drive gear turns smoothly.
35301B
6.INSTALL FRONT OIL PUMP BODY O-RING
Coat a new front oil pump body O-ring with Toyota Genuine ATF Type T-IV, and install it to the front oil pump body.