Home › Drivetrain › U441E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER
RM19S0E _52 Drivetrain _051466 U441E AUTOMATIC TRANSMISSION / TRANSAXLE _0248182 SHIFT LEVER N

U441E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  ADJUSTMENT  


PROCEDURE

Hide 58910C 1.REMOVE REAR CONSOLE BOX ASSEMBLY

Hide 2.ADJUST SHIFT LEVER POSITION

a.

Move the shift lever to N.


b.
C195135E01
2.846,0.142 3.185,0.434 0.339,0.292 10 *1 2.038,0.142 2.377,0.434 0.339,0.292 10 *2 2.359,2.021 2.698,2.313 0.339,0.292 10 *3 2.014,0.241 1.632,0.572 false 2.834,0.251 2.369,0.649 false 2.36,2.131 2.02,2.425 false

Slide the adjuster case cover in the direction shown by the arrow.

Text in Illustration
*1 Adjuster Case
*2 Cover
*3 Lock Piece


c.

Using a precision screwdriver, pull up the lock piece.


d.
C195136E01
2.955,0.188 3.203,0.386 0.248,0.198 10 *1 2.284,0.188 2.533,0.386 0.248,0.198 10 *2 0.967,0.188 1.215,0.386 0.248,0.198 10 *3 0.597,1.726 0.846,1.923 0.248,0.198 10 *4 2.284,0.293 2.049,0.637 false 2.951,0.295 2.628,0.76 false 0.973,0.295 0.566,0.898 false 0.788,1.815 1.195,2.418 false

Using your fingers, gently pull the cable rod towards the rear of the vehicle to remove backlash.

Text in Illustration
*1 Adjuster Case
*2 Lock Piece
*3 Cable Rod
*4 Cover


e.

Push in the lock piece of the adjuster case to lock it.


f.

Slide the adjuster case cover in the direction shown by the arrow.

NOTICE:

If the cover is not pushed over the protrusion on the lock, the cable will not lock and shift operation will not be accurate.



Hide 58910C 3.INSTALL REAR CONSOLE BOX ASSEMBLY