Home › Drivetrain › CLUTCH › CLUTCH RELEASE CYLINDER
RM19S0E _52 Drivetrain _051467 CLUTCH _0248190 CLUTCH RELEASE CYLINDER A

CLUTCH  CLUTCH RELEASE CYLINDER  REASSEMBLY  


PROCEDURE

Hide 31477 1.INSTALL RELEASE CYLINDER BLEEDER PLUG

a.

Install the release cylinder bleeder plug to the release cylinder body.

Torque:
8.3 N*m (85 kgf*cm, 73 in.*lbf)


Hide 04313 2.INSTALL CLUTCH RELEASE CYLINDER KIT

a.

Install the release cylinder bleeder plug cap to the release cylinder bleeder plug.


b.
C128485

Apply lithium soap base glycol grease to a new release cylinder piston.

Text in Illustration
V100135

Lithium soap base glycol grease


c.

Install a new compression spring and the release cylinder piston to the release cylinder body.

NOTICE:

Do not damage the inside of the release cylinder body.


HINT:

Install the smaller end of the compression spring to the release cylinder piston.



d.

Install a new clutch release cylinder boot to the No. 1 clutch release cylinder push rod.


e.

Install the clutch release cylinder boot and the No. 1 clutch release cylinder push rod to the release cylinder body.