1.DRAIN MANUAL TRANSAXLE OIL
Remove the manual transmission filler plug and the gasket.
Remove the drain plug sub-assembly and gasket, and then drain the manual transaxle oil.
Install a new gasket and the drain plug sub-assembly.
2.ADD MANUAL TRANSAXLE OIL
Add manual transmission oil until the oil level is within 5 mm (0.197 in.) from the bottom of the manual transmission filler plug opening.
| *a | 0 to 5 mm (0 to 0.197 in.) |
1.9 liters (2.0 US qts, 1.7 Imp. qts)
Toyota Genuine Manual Transmission Gear Oil "LV GL-3 and SAE 75W-90" or "API GL-4 and SAE 75W"
Check for oil leakage when the oil level is low.
Install the transmission filler plug and a new gasket.
3.INSPECT FOR MANUAL TRANSAXLE OIL
4.INSPECT FOR MANUAL TRANSAXLE OIL LEAK