Home › Drivetrain › C54 MANUAL TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE
RM19S0E _52 Drivetrain _051468 C54 MANUAL TRANSMISSION / TRANSAXLE _0248196 TRANSMISSION CONTROL CABLE N

C54 MANUAL TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  ADJUSTMENT  


PROCEDURE

Hide 58910C 1.REMOVE REAR CONSOLE BOX ASSEMBLY

Hide 2.ADJUST TRANSMISSION CONTROL SELECT CABLE

a.
C235560E01
0.682,1.594 0.852,1.755 0.170,0.161 10 *1 1.247,1.159 0.881,1.669 false

Remove the clip and disconnect the control select cable from the floor shift shift lever assembly.

Text in Illustration
*1 Control Select Cable


b.
C235815E01
1.297,0.624 0.715,0.426 false 0.514,0.329 0.684,0.490 0.170,0.161 10 *1

Slide the adjuster case cover in the direction shown in the illustration.

Text in Illustration
*1 Adjuster Case Cover


c.
C241538E01
2.677,0.775 2.898,0.39 false 2.031,0.738 2.252,0.353 false 0.925,2.652 1.265,1.898 false 2.266,0.27 2.435,0.430 0.170,0.161 10 *1 2.897,0.27 3.067,0.430 0.170,0.161 10 *2 1.271,1.805 1.441,1.965 0.170,0.161 10 *3

Pull out the lock piece from the adjuster case.

Text in Illustration
*1 Lock Piece
*2 Adjuster Case
*3 Cable Rod


d.

Install the control select cable to the floor shift shift lever assembly with the clip.

NOTICE:
·

Make sure to adjust the length at the neutral shift position.

·

Make sure that the lock piece is protruding from the adjuster case.




e.

Gently pull the cable rod toward the rear of the vehicle by hand to pull the cable taut.


f.

Press the lock piece into the adjuster case and lock it.


g.
C235819E01
1.143,0.66 0.671,0.508 false 0.472,0.421 0.642,0.582 0.170,0.161 10 *1

Slide the adjuster case cover in the direction shown in the illustration.

Text in Illustration
*1 Adjuster Case Cover

NOTICE:

Slide the cover past the protrusion portion of the lock piece.



Hide 58910C 3.INSTALL REAR CONSOLE BOX ASSEMBLY