Home › Drivetrain › C54 MANUAL TRANSMISSION / TRANSAXLE › SHIFT AND SELECT LEVER SHAFT
RM19S0E _52 Drivetrain _051468 C54 MANUAL TRANSMISSION / TRANSAXLE _0248203 SHIFT AND SELECT LEVER SHAFT A

C54 MANUAL TRANSMISSION / TRANSAXLE  SHIFT AND SELECT LEVER SHAFT  DISASSEMBLY  


PROCEDURE

Hide 33277 1.REMOVE NO. 2 SELECT SPRING SEAT

C120733

a.

Using a screwdriver, remove the E-ring, No. 2 select spring seat and the compression spring from the shift and select lever shaft.


Hide 33252A 2.REMOVE NO. 2 SHIFT LEVER INNER

C120734

a.

Using a pin punch (5 mm) and a hammer, remove the slotted spring pin and the No. 2 shift lever inner from the shift and select lever shaft.

HINT:

Check the orientation of the No. 2 shift lever inner.



Hide 33251A 3.REMOVE NO. 1 SHIFT LEVER INNER

C121093

a.

Using a pin punch (5 mm) and a hammer, remove the slotted spring pin, No. 1 shift lever inner and the shift inter lock plate from the shift and select lever shaft.

HINT:

Check the orientation of the No. 1 shift lever inner.



Hide 33256 4.REMOVE SELECT INNER LEVER

C120736

a.

Using a pin punch (5 mm) and a hammer, remove the slotted spring pin, select inner lever, compression spring and the No. 1 select spring seat from the shift and select lever shaft.

HINT:

Check the orientation of the select inner lever.



Hide 33276H 5.REMOVE SELECT SPRING NO. 1 SEAT SHAFT SNAP RING

C120737

a.

Using 2 screwdrivers and a hammer, remove the select spring No. 1 seat shaft snap ring.