Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER
RM19S0E _53 Suspension _051472 FRONT SUSPENSION _0248215 FRONT SHOCK ABSORBER N

FRONT SUSPENSION  FRONT SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48520 1.DISPOSE OF FRONT SHOCK ABSORBER

a.
C110330E01
1.746,0.245 1.902,0.427 0.156,0.181 10 A 2.452,0.243 2.608,0.425 0.156,0.181 10 B

Fully extend the front shock absorber piston rod, and fix it at an angle in a vise or similar tool.


b.

Using a drill or similar tool, slowly make a hole in the area (A-B) shown in the illustration to discharge the gas inside.

NOTICE:
·

The gas is colorless, odorless and harmless.

·

Since the discharging gas may cause chips to scatter, cover the drill with a piece of cloth when making the hole.