Home › Suspension › FRONT SUSPENSION › FRONT LOWER SUSPENSION ARM(for LH Side)
RM19S0E _53 Suspension _051472 FRONT SUSPENSION _0248216 FRONT LOWER SUSPENSION ARM(for LH Side) G

FRONT SUSPENSION  FRONT LOWER SUSPENSION ARM(for LH Side)  INSPECTION  


PROCEDURE

Hide 48069 1.INSPECT FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH

C107516

a.

As shown in the illustration, flip the ball joint stud back and forth 5 times before installing the nut.


b.

Using a torque wrench, turn the nut continuously at a rate of 2 to 4 seconds per turn and take the torque reading on the 5th turn.

Torque:
0.78 to 3.43 N*m (8 to 35 kgf*cm, 6.9 to 30 in.*lbf)


c.

Check for any cracks and grease leakage on the ball joint dust cover.